Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeChoose Product
Identify Problem
03
Find Solutions
HomeRepair HelpAdmiral Washer RepairAdmiral Washer water is the wrong temperature Repair
Admiral Washer water is the wrong temperature
If your Admiral washer has the wrong water temperature, first check the temperature sensor, which tells the water inlet valve whether to release hot or cold water. A faulty sensor can cause a washer water wrong temperature problem, including a washer with no hot water or water that is too hot or too cold. Next, test the temperature selector switch, since a failed switch may send power to only one side of the water inlet valve. A damaged dispenser door can also interfere with proper temperature selection. If those parts test correctly, unplug the washer, shut off the water supplies, and clean debris from the fill hose screens and water inlet valve screens. Reversed fill hoses are another common cause, causing hot and cold water settings to be switched. A defective temperature control switch is less common but can prevent the inlet valve's hot or cold solenoid from receiving the correct voltage. Use a multimeter when testing electrical parts, and replace any component that fails continuity testing. Enter your Admiral washer model number to find the exact replacement temperature sensor, switch, dispenser door, or water inlet valve for your machine.
01 - Admiral Washing Machine Temperature Sensor
The washer's temperature sensor determines whether more hot or cold water should be released by the water inlet valve to maintain an appropriate water temperature in the tub. If the sensor is faulty, the incoming water may be the wrong temperature. You can use a multimeter to test the sensor for appropriate electrical continuity. If the sensor tests inappropriately, the part will need to be replaced.
Enter model number to search for the required part specific to your product
Highly Likely
02 - Admiral Washing Machine Temperature Switch
The temperature selector switch allows power to be sent to the water inlet valve to release hot or cold water. If the temperature selector switch is faulty, the valve may only allow only one temperature of water to fill the tub. You can use a multimeter to test the switch for electrical continuity. If the switch tests negative for continuity, the part will need to be replaced.
Highly Likely
03 - Admiral Washing Machine Dispenser Door
The temperature selector switch allows power to be sent to the water inlet valve to release hot or cold water. If the temperature selector switch is faulty, the valve may only allow only one temperature of water to fill the tub. You can use a multimeter to test the switch for electrical continuity. If the switch tests negative for continuity, the part will need to be replaced.
Highly Likely
04 - Clogged Screens in Fill Hose or Water Inlet Valve
All water valves have filter screens to prevent particles from clogging the valve or stop the valve from closing. For added protection and easier access, some fill hoses may have screens added to the hose washers/gaskets where the fill hose connects to the homes hot or cold shut-off valve. The screens in the water valve and hoses should be checked and cleaned if necessary. Unplug the machine. Turn off the water supply valves. Get a bucket to catch the remaining water in the hoses. Unthread the hoses from your machine and clean any debris from the filter screens.
Common
05 - Fill hoses reversed
If the fill hoses are not connected to the appropriate valve faucets or ports (one hose connecting the cold water supply valve to the washer's cold water inlet valve port and the other hose connecting the hot water supply valve to the hot water inlet valve port), the wash and rinse water temperatures will be reversed. Check that the fill hoses are connected correctly. There are usually markings next to the water inlet valve connections for the hot (H) and cold (C) designations.
Common
06 - Admiral Washing Machine Temperature Control Switch
The temperature control switch switches power to either the cold or hot solenoid on the water supply valve to maintain the proper water temperature. If the temperature control switch is defective the water inlet valve may not receive the proper voltage to work properly. If the temperature control switch is not sending proper voltage to the water inlet valve solenoids it will need to be replaced.
Less Common
Frequently Asked Questions
Why is my Admiral washer water the wrong temperature?
Why is my Admiral washer not getting hot water?
Can clogged screens cause my washing machine water temperature to be wrong?
How do I test an Admiral washer temperature sensor or temperature switch?
How do I find the correct Admiral washer temperature part?
Shop by Admiral Washing Machine Parts
Shop by Popular Admiral Washing Machine Models
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com