Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeChoose Product
Identify Problem
03
Find Solutions
HomeRepair HelpNorge Washer RepairNorge Washer water is the wrong temperature Repair
Norge Washer water is the wrong temperature
When your Norge washer water is the wrong temperature, the temperature sensor is the most likely cause. This sensor tells the water inlet valve whether to add hot or cold water, and you can test it for electrical continuity with a multimeter. A faulty temperature switch can also send incorrect power to the valve, while a damaged dispenser door may interfere with proper temperature selection. Next, check for clogged screens in the fill hoses or water inlet valve. Unplug the washing machine, shut off both water supplies, remove the hoses, and clean any debris from the filter screens. If the washer water is too hot, too cold, or you have a washer no hot water problem, make sure the hot and cold fill hoses are connected to the correct ports. A defective temperature control switch is less common but can prevent the inlet valve solenoids from receiving the proper voltage. Check these parts and connections before replacing components. Enter your Norge washer model number to find the exact replacement temperature sensor, temperature switch, water inlet valve, or other part that fits your specific washing machine.
01 - Norge Washing Machine Temperature Sensor
The washer's temperature sensor determines whether more hot or cold water should be released by the water inlet valve to maintain an appropriate water temperature in the tub. If the sensor is faulty, the incoming water may be the wrong temperature. You can use a multimeter to test the sensor for appropriate electrical continuity. If the sensor tests inappropriately, the part will need to be replaced.
Enter model number to search for the required part specific to your product
Highly Likely
02 - Norge Washing Machine Temperature Switch
The temperature selector switch allows power to be sent to the water inlet valve to release hot or cold water. If the temperature selector switch is faulty, the valve may only allow only one temperature of water to fill the tub. You can use a multimeter to test the switch for electrical continuity. If the switch tests negative for continuity, the part will need to be replaced.
Highly Likely
03 - Norge Washing Machine Dispenser Door
The temperature selector switch allows power to be sent to the water inlet valve to release hot or cold water. If the temperature selector switch is faulty, the valve may only allow only one temperature of water to fill the tub. You can use a multimeter to test the switch for electrical continuity. If the switch tests negative for continuity, the part will need to be replaced.
Highly Likely
04 - Clogged Screens in Fill Hose or Water Inlet Valve
All water valves have filter screens to prevent particles from clogging the valve or stop the valve from closing. For added protection and easier access, some fill hoses may have screens added to the hose washers/gaskets where the fill hose connects to the homes hot or cold shut-off valve. The screens in the water valve and hoses should be checked and cleaned if necessary. Unplug the machine. Turn off the water supply valves. Get a bucket to catch the remaining water in the hoses. Unthread the hoses from your machine and clean any debris from the filter screens.
Common
05 - Fill hoses reversed
If the fill hoses are not connected to the appropriate valve faucets or ports (one hose connecting the cold water supply valve to the washer's cold water inlet valve port and the other hose connecting the hot water supply valve to the hot water inlet valve port), the wash and rinse water temperatures will be reversed. Check that the fill hoses are connected correctly. There are usually markings next to the water inlet valve connections for the hot (H) and cold (C) designations.
Common
06 - Norge Washing Machine Temperature Control Switch
The temperature control switch switches power to either the cold or hot solenoid on the water supply valve to maintain the proper water temperature. If the temperature control switch is defective the water inlet valve may not receive the proper voltage to work properly. If the temperature control switch is not sending proper voltage to the water inlet valve solenoids it will need to be replaced.
Less Common
Frequently Asked Questions
Why is my Norge washer water the wrong temperature?
How do I fix a washing machine with no hot water or water that is too cold?
Can a faulty temperature sensor cause my washer water temperature to be wrong?
How do I test the temperature selector switch on a Norge washing machine?
How do I find the correct Norge washer temperature part?
Shop by Norge Washing Machine Parts
Shop by Popular Norge Washing Machine Models
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com