Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeChoose Product
Identify Problem
03
Find Solutions
HomeRepair HelpARDO Washer RepairARDO Washer water is the wrong temperature Repair
ARDO Washer water is the wrong temperature
When your ARDO washer has the wrong water temperature, the washer water wrong temperature problem may come from the temperature sensor, temperature selector switch, or dispenser door. The temperature sensor monitors the water temperature and signals the water inlet valve to add hot or cold water. Test it with a multimeter and replace it if it lacks proper continuity. A faulty temperature selector switch can send incorrect power to the water inlet valve, causing washer no hot water, water that is too cold, or water that is too hot. The dispenser door is another highly likely cause listed for this symptom. Next, check for clogged screens in the fill hoses or water inlet valve. Unplug the washer, shut off the water, remove the hoses, and clean any debris from the screens. If the hot and cold fill hoses are reversed, wash and rinse temperatures will also be reversed. A defective temperature control switch is less common but can prevent the valve's hot or cold solenoid from receiving the correct voltage. Enter your ARDO washer model number to find the exact replacement part for your specific machine.
01 - ARDO Washing Machine Temperature Sensor
The washer's temperature sensor determines whether more hot or cold water should be released by the water inlet valve to maintain an appropriate water temperature in the tub. If the sensor is faulty, the incoming water may be the wrong temperature. You can use a multimeter to test the sensor for appropriate electrical continuity. If the sensor tests inappropriately, the part will need to be replaced.
Enter model number to search for the required part specific to your product
Highly Likely
02 - ARDO Washing Machine Temperature Switch
The temperature selector switch allows power to be sent to the water inlet valve to release hot or cold water. If the temperature selector switch is faulty, the valve may only allow only one temperature of water to fill the tub. You can use a multimeter to test the switch for electrical continuity. If the switch tests negative for continuity, the part will need to be replaced.
Highly Likely
03 - ARDO Washing Machine Dispenser Door
The temperature selector switch allows power to be sent to the water inlet valve to release hot or cold water. If the temperature selector switch is faulty, the valve may only allow only one temperature of water to fill the tub. You can use a multimeter to test the switch for electrical continuity. If the switch tests negative for continuity, the part will need to be replaced.
Highly Likely
04 - Clogged Screens in Fill Hose or Water Inlet Valve
All water valves have filter screens to prevent particles from clogging the valve or stop the valve from closing. For added protection and easier access, some fill hoses may have screens added to the hose washers/gaskets where the fill hose connects to the homes hot or cold shut-off valve. The screens in the water valve and hoses should be checked and cleaned if necessary. Unplug the machine. Turn off the water supply valves. Get a bucket to catch the remaining water in the hoses. Unthread the hoses from your machine and clean any debris from the filter screens.
Common
05 - Fill hoses reversed
If the fill hoses are not connected to the appropriate valve faucets or ports (one hose connecting the cold water supply valve to the washer's cold water inlet valve port and the other hose connecting the hot water supply valve to the hot water inlet valve port), the wash and rinse water temperatures will be reversed. Check that the fill hoses are connected correctly. There are usually markings next to the water inlet valve connections for the hot (H) and cold (C) designations.
Common
06 - ARDO Washing Machine Temperature Control Switch
The temperature control switch switches power to either the cold or hot solenoid on the water supply valve to maintain the proper water temperature. If the temperature control switch is defective the water inlet valve may not receive the proper voltage to work properly. If the temperature control switch is not sending proper voltage to the water inlet valve solenoids it will need to be replaced.
Less Common
Frequently Asked Questions
Why is my ARDO washer water the wrong temperature?
How do I test an ARDO washer temperature sensor?
Can a faulty temperature switch cause my washing machine water to be too hot or too cold?
How do I check the water inlet valve when my ARDO washer is not getting hot water?
How do I find the correct ARDO washer temperature part?
Shop by Popular ARDO Washing Machine Models
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com