Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeChoose Product
Identify Problem
03
Find Solutions
HomeRepair HelpJenn Air Washer RepairJenn Air Washer takes too long Repair
Jenn Air Washer takes too long
When your Jenn Air washer is taking too long to wash, check the water supply first. Both the hot and cold water valves must be fully open. A closed or partially open valve can make the washing machine take too long to fill or delay the start of the cycle. If the supply is adequate, a faulty heating element may be causing the washer cycle to run longer than normal, especially when the machine cannot reach the selected water temperature. Test the heating element for electrical continuity with a multimeter and replace it if the test fails. A defective water inlet valve is another possible cause of a washer taking too long to wash. Check household water pressure, clean the inlet valve screens, and replace the valve if the washer still fills slowly. These checks can help answer, "Why does my washer take so long?" Enter your Jenn Air washer model number to find the exact replacement heating element or water inlet valve for your specific washing machine.
01 - Water supply valve turned off
Confirm that both the hot and cold water supply valves are fully open. If the valves are closed or partially open the washer won't fill or will take longer to start the wash cycle.
Highly Likely
02 - Jenn Air Washing Machine Heating Element
Many washers use a heating element to raise the temperature of the water entering the tub. A defective element may cause the washer to take too long to clean its load. You can use a multimeter to test the heating element for electrical continuity. If the element tests negative for continuity, you'll know the heating element is faulty and will need to be replaced.
Enter model number to search for the required part specific to your product
Less Common
03 - Jenn Air Washing Machine Water Inlet Valve
The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires sufficient water pressure to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, try cleaning the screens inside the water inlet valve hose connection ports. If the washer still fills slowly, replace the water inlet valve.
Less Common
Frequently Asked Questions
Why is my Jenn Air washer taking too long to wash?
What should I check if my Jenn Air washer fills slowly?
Can a heating element make a washing machine take too long?
How do I know whether the water inlet valve or water supply is causing the delay?
How do I find the correct Jenn Air washer part for this repair?
Shop by Jenn Air Washing Machine Parts
Shop by Popular Jenn Air Washing Machine Models
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com