Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeChoose Product
Identify Problem
03
Find Solutions
HomeRepair HelpGibson Washer RepairGibson Washer takes too long Repair
Gibson Washer takes too long
If your Gibson washer is taking too long to wash, the problem may be as simple as restricted water flow. Start by confirming that both the hot and cold water supply valves are fully open. Partially closed valves can make the washer fill slowly or delay the start of the cycle. A failed heating element is another likely cause, especially if the washing machine is taking too long to reach the selected water temperature. Test the heating element with a multimeter for electrical continuity and replace it if it fails the test. If the washer cycle is still too long, check the water inlet valve. This valve controls water entering the tub, and low household water pressure or clogged screens at the hose connections can cause slow filling. If water pressure is adequate and cleaning the screens does not help, replace the water inlet valve. Whether you are asking, "Why does my washer take so long?" or dealing with a washer taking too long to wash, enter your Gibson washer's model number to find the exact replacement part for your specific machine.
01 - Water supply valve turned off
Confirm that both the hot and cold water supply valves are fully open. If the valves are closed or partially open the washer won't fill or will take longer to start the wash cycle.
Highly Likely
02 - Gibson Washing Machine Heating Element
Many washers use a heating element to raise the temperature of the water entering the tub. A defective element may cause the washer to take too long to clean its load. You can use a multimeter to test the heating element for electrical continuity. If the element tests negative for continuity, you'll know the heating element is faulty and will need to be replaced.
Enter model number to search for the required part specific to your product
Less Common
03 - Gibson Washing Machine Water Inlet Valve
The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires sufficient water pressure to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, try cleaning the screens inside the water inlet valve hose connection ports. If the washer still fills slowly, replace the water inlet valve.
Less Common
Frequently Asked Questions
Why is my Gibson washer taking too long to wash?
Why is my Gibson washer filling slowly?
Can a faulty heating element make a washing machine take too long?
How do I know whether the water inlet valve is causing my washer to take too long?
How do I find the correct Gibson washer heating element or water inlet valve?
Shop by Gibson Washing Machine Parts
Shop by Popular Gibson Washing Machine Models
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com