If your Admiral washer won't agitate, the agitator may be worn, stripped, or damaged. Start by inspecting the agitator repair kit, which includes the components most likely to fail and cause an agitator not working problem. Next, check the drive block or bell. This part connects the transmission shaft to the agitator, and a worn drive block can leave the transmission moving while the agitator barely moves or does not move at all. A failed lid switch assembly can also prevent the washer from agitating or spinning, so test it for continuity with the lid closed. Make sure the lid is fully closed and the lid strike is not obstructed. If those parts are sound, inspect the motor coupling for breakage, especially after an overloaded load, then check the drive belt for damage, looseness, or separation from the pulleys. These repairs can correct an Admiral washing machine not agitating and, in some cases, a washer that won't agitate or spin. Enter your model number to find the exact replacement part for your specific washing machine.
01 - Admiral Washing Machine Agitator Repair Kit
If the washer won't agitate, replacing the agitator repair kit may solve the problem. The kit contains the agitator components that are most likely to wear out and/or fail. If any of the parts are worn out, stripped, or damaged, replace the kit.
Enter model number to search for the required part specific to your product
The drive block connects the washer transmission to the agitator. If the drive block is worn out, the transmission shaft will still move back and forth, but the agitator will only move slightly or will not move at all. Inspect the drive block for damage. If the drive block is worn out, stripped, or damaged, replace it.
On some models the lid switch assembly prevents the washer from both spinning and agitating when the lid is open. If the lid switch assembly fails, the washer will not spin or agitate. To determine if the lid switch assembly is defective, use a multimeter to test the lid switch for continuity. If the lid switch does not have continuity when the lid is closed, replace it.
On most top load machines the washer will not agitate or spin without the lid being fully closed. Close the lid after loading the washer and ensure there are no obstructions preventing the lid strike from connecting to the lid switch or latch.
Top Solution
05 - Admiral Washing Machine Motor Coupling
The motor coupling connects the motor to the washer transmission. If the washer is overloaded, the motor coupling will fail in order to protect both the motor and transmission. The motor coupling can also fail due to normal wear. Inspect the motor coupling to determine if it is broken. If the motor coupling is broken, replace it.