Choose Product
Identify Problem
03
Find Solutions

Asko Washer won't agitate

When your Asko washer won't agitate, start with the agitator repair kit. Worn, stripped, or damaged agitator components are the most common cause of a washer not agitating. Next, inspect the drive block or bell, which connects the transmission shaft to the agitator. If it is worn or stripped, the transmission may move while the agitator barely moves or does not move at all. A failed lid switch assembly can also stop the washing machine from agitating and spinning. Test the switch for continuity with a multimeter, and make sure the lid is fully closed and the lid strike is not blocked. If these parts check out, inspect the motor coupling for cracks or breaks, especially after an overload, then check whether the drive belt is broken, loose, or slipping on the pulleys. These problems can cause washer agitator problems even when the motor runs. Enter your Asko washer's model number to find the exact replacement agitator repair kit, drive block, lid switch assembly, motor coupling, or drive belt for your specific washing machine.

01 - Asko Washing Machine Agitator Repair Kit

If the washer won't agitate, replacing the agitator repair kit may solve the problem. The kit contains the agitator components that are most likely to wear out and/or fail. If any of the parts are worn out, stripped, or damaged, replace the kit.
Enter model number to search for the required part specific to your product
Top Solution

02 - Asko Washing Machine Drive Block or Bell

The drive block connects the washer transmission to the agitator. If the drive block is worn out, the transmission shaft will still move back and forth, but the agitator will only move slightly or will not move at all. Inspect the drive block for damage. If the drive block is worn out, stripped, or damaged, replace it.
Top Solution

03 - Asko Washing Machine Lid Switch Assembly

On some models the lid switch assembly prevents the washer from both spinning and agitating when the lid is open. If the lid switch assembly fails, the washer will not spin or agitate. To determine if the lid switch assembly is defective, use a multimeter to test the lid switch for continuity. If the lid switch does not have continuity when the lid is closed, replace it.
Top Solution

04 - Lid Not Fully Closed

On most top load machines the washer will not agitate or spin without the lid being fully closed. Close the lid after loading the washer and ensure there are no obstructions preventing the lid strike from connecting to the lid switch or latch.
Top Solution

05 - Asko Washing Machine Motor Coupling

The motor coupling connects the motor to the washer transmission. If the washer is overloaded, the motor coupling will fail in order to protect both the motor and transmission. The motor coupling can also fail due to normal wear. Inspect the motor coupling to determine if it is broken. If the motor coupling is broken, replace it.
Highly Likely

06 - Asko Washing Machine Drive Belt

Inspect the drive belt to determine if it is broken or if it is loose on the pulleys. If the drive belt is broken or loose, replace it.
Highly Likely

Frequently Asked Questions

Why is my Asko washer not agitating?
Why won't my Asko washer agitate or spin?
How do I check the motor coupling and drive belt on an Asko washing machine?
How do I know whether the agitator repair kit or drive block is bad?
How can I find the correct Asko washer agitator part?