Choose Product
Identify Problem
03
Find Solutions

E-Wave Washer won't agitate

If your E-Wave washer won't agitate, the agitator repair kit is the most likely problem. Worn, stripped, or damaged agitator components can prevent the agitator from moving even though the washer motor runs. If the kit is in good condition, inspect the drive block or bell, which connects the transmission shaft to the agitator. A worn drive block may allow the shaft to move back and forth while the agitator moves only slightly or not at all. The lid switch assembly is another common cause of a washing machine not agitating, since some models will not agitate or spin if the switch fails. Make sure the lid is fully closed and that nothing blocks the lid strike from engaging the switch or latch. If the lid switch has no continuity with the lid closed, replace it. A broken motor coupling or loose or broken drive belt can also stop the washer from agitating, especially after an overload or extended wear. Enter your model number to find the exact replacement agitator repair kit, drive block, lid switch assembly, motor coupling, or drive belt for your E-Wave washing machine.

01 - E-Wave Washing Machine Agitator Repair Kit

If the washer won't agitate, replacing the agitator repair kit may solve the problem. The kit contains the agitator components that are most likely to wear out and/or fail. If any of the parts are worn out, stripped, or damaged, replace the kit.
Enter model number to search for the required part specific to your product
Top Solution

02 - E-Wave Washing Machine Drive Block or Bell

The drive block connects the washer transmission to the agitator. If the drive block is worn out, the transmission shaft will still move back and forth, but the agitator will only move slightly or will not move at all. Inspect the drive block for damage. If the drive block is worn out, stripped, or damaged, replace it.
Top Solution

03 - E-Wave Washing Machine Lid Switch Assembly

On some models the lid switch assembly prevents the washer from both spinning and agitating when the lid is open. If the lid switch assembly fails, the washer will not spin or agitate. To determine if the lid switch assembly is defective, use a multimeter to test the lid switch for continuity. If the lid switch does not have continuity when the lid is closed, replace it.
Top Solution

04 - Lid Not Fully Closed

On most top load machines the washer will not agitate or spin without the lid being fully closed. Close the lid after loading the washer and ensure there are no obstructions preventing the lid strike from connecting to the lid switch or latch.
Top Solution

05 - E-Wave Washing Machine Motor Coupling

The motor coupling connects the motor to the washer transmission. If the washer is overloaded, the motor coupling will fail in order to protect both the motor and transmission. The motor coupling can also fail due to normal wear. Inspect the motor coupling to determine if it is broken. If the motor coupling is broken, replace it.
Highly Likely

06 - E-Wave Washing Machine Drive Belt

Inspect the drive belt to determine if it is broken or if it is loose on the pulleys. If the drive belt is broken or loose, replace it.
Highly Likely

Frequently Asked Questions

Why won't my E-Wave washer agitate but will spin?
Why won't my washer agitate or spin?
What should I check if my E-Wave washer is not agitating?
Can a washer lid problem cause it to stop agitating?
How do I find the correct E-Wave washer agitator part?