Won’t your Frigidaire washer agitate? The agitator repair kit is the most likely cause. Worn, stripped, or damaged agitator components can prevent the agitator from moving even when the washer motor runs. A worn drive block or bell is another common reason for a washer agitator not working. The transmission shaft may move back and forth, while the agitator moves only slightly or not at all. Next, check the lid switch assembly and make sure the lid is fully closed. A failed lid switch can prevent the washing machine from agitating or spinning, while an obstruction may keep the lid strike from contacting the switch or latch. If those parts are sound, inspect the motor coupling for breaks caused by overloading or normal wear, then check whether the drive belt is broken or loose on the pulleys. Unplug the washer before inspecting or testing parts, and use a multimeter to check lid switch continuity when appropriate. Enter your model number to find the exact replacement agitator repair kit, drive block, lid switch, motor coupling, or drive belt for your specific Frigidaire washing machine.
If the washer won't agitate, replacing the agitator repair kit may solve the problem. The kit contains the agitator components that are most likely to wear out and/or fail. If any of the parts are worn out, stripped, or damaged, replace the kit.
Enter model number to search for the required part specific to your product
02 - Frigidaire Washing Machine Drive Block or Bell
The drive block connects the washer transmission to the agitator. If the drive block is worn out, the transmission shaft will still move back and forth, but the agitator will only move slightly or will not move at all. Inspect the drive block for damage. If the drive block is worn out, stripped, or damaged, replace it.
03 - Frigidaire Washing Machine Lid Switch Assembly
On some models the lid switch assembly prevents the washer from both spinning and agitating when the lid is open. If the lid switch assembly fails, the washer will not spin or agitate. To determine if the lid switch assembly is defective, use a multimeter to test the lid switch for continuity. If the lid switch does not have continuity when the lid is closed, replace it.
On most top load machines the washer will not agitate or spin without the lid being fully closed. Close the lid after loading the washer and ensure there are no obstructions preventing the lid strike from connecting to the lid switch or latch.
Top Solution
05 - Frigidaire Washing Machine Motor Coupling
The motor coupling connects the motor to the washer transmission. If the washer is overloaded, the motor coupling will fail in order to protect both the motor and transmission. The motor coupling can also fail due to normal wear. Inspect the motor coupling to determine if it is broken. If the motor coupling is broken, replace it.