Choose Product
Identify Problem
03
Find Solutions

Maytag Washer won't agitate

Won’t your Maytag washer agitate? The agitator repair kit is the most likely cause. The kit includes the agitator components that commonly wear out, strip, or break, so inspect them and replace the kit if damaged. A worn or stripped drive block can also prevent the transmission shaft from moving the agitator correctly. Next, check the lid switch assembly. On some Maytag top-load models, a failed switch stops both agitation and spinning. Make sure the lid is fully closed and that nothing blocks the lid strike from contacting the switch or latch. If the washer not agitating problem remains, inspect the motor coupling for breaks caused by overloading or normal wear, then check whether the drive belt is broken or loose on the pulleys. These failures can cause a washing machine not agitating, and some may also leave the washer unable to spin. Disconnect power before inspecting internal parts. Enter your Maytag washer's model number to find the exact replacement agitator repair kit, drive block, lid switch, motor coupling, or drive belt for your specific washing machine.

01 - Maytag Washing Machine Agitator Repair Kit

If the washer won't agitate, replacing the agitator repair kit may solve the problem. The kit contains the agitator components that are most likely to wear out and/or fail. If any of the parts are worn out, stripped, or damaged, replace the kit.
Enter model number to search for the required part specific to your product
Top Solution

02 - Maytag Washing Machine Drive Block or Bell

The drive block connects the washer transmission to the agitator. If the drive block is worn out, the transmission shaft will still move back and forth, but the agitator will only move slightly or will not move at all. Inspect the drive block for damage. If the drive block is worn out, stripped, or damaged, replace it.
Top Solution

03 - Maytag Washing Machine Lid Switch Assembly

On some models the lid switch assembly prevents the washer from both spinning and agitating when the lid is open. If the lid switch assembly fails, the washer will not spin or agitate. To determine if the lid switch assembly is defective, use a multimeter to test the lid switch for continuity. If the lid switch does not have continuity when the lid is closed, replace it.
Top Solution

04 - Lid Not Fully Closed

On most top load machines the washer will not agitate or spin without the lid being fully closed. Close the lid after loading the washer and ensure there are no obstructions preventing the lid strike from connecting to the lid switch or latch.
Top Solution

05 - Maytag Washing Machine Motor Coupling

The motor coupling connects the motor to the washer transmission. If the washer is overloaded, the motor coupling will fail in order to protect both the motor and transmission. The motor coupling can also fail due to normal wear. Inspect the motor coupling to determine if it is broken. If the motor coupling is broken, replace it.
Highly Likely

06 - Maytag Washing Machine Drive Belt

Inspect the drive belt to determine if it is broken or if it is loose on the pulleys. If the drive belt is broken or loose, replace it.
Highly Likely

Frequently Asked Questions

Why won't my Maytag washer agitate?
Why won't my Maytag washer agitate or spin?
How do I know if the agitator repair kit or drive block is bad?
How do I identify the correct Maytag washer agitator part?
What should I check before replacing a Maytag washer motor or control board?

Shop by Maytag Washing Machine Parts