Choose Product
Identify Problem
03
Find Solutions

Kelvinator Washer won't agitate

If your Kelvinator washer won't agitate, the agitator repair kit is the most likely cause. Worn, stripped, or damaged agitator components can keep the agitator from moving even when the washer motor and transmission are running. Next, inspect the drive block or bell, which connects the transmission shaft to the agitator. If it is worn or stripped, the shaft may move back and forth while the agitator barely moves or does not move at all. A failed lid switch assembly can also stop the washer from agitating, and the lid must be fully closed with the lid strike properly engaging the switch or latch. If these parts check out, inspect the motor coupling for breakage, especially after an overloaded load, then check whether the drive belt is broken or loose on the pulleys. These are common causes of a washer not agitating or a washing machine not agitating. Enter your Kelvinator washer model number to find the exact replacement agitator repair kit, drive block, lid switch, motor coupling, drive belt, or other part that fits your specific machine.

01 - Kelvinator Washing Machine Agitator Repair Kit

If the washer won't agitate, replacing the agitator repair kit may solve the problem. The kit contains the agitator components that are most likely to wear out and/or fail. If any of the parts are worn out, stripped, or damaged, replace the kit.
Enter model number to search for the required part specific to your product
Top Solution

02 - Kelvinator Washing Machine Drive Block or Bell

The drive block connects the washer transmission to the agitator. If the drive block is worn out, the transmission shaft will still move back and forth, but the agitator will only move slightly or will not move at all. Inspect the drive block for damage. If the drive block is worn out, stripped, or damaged, replace it.
Top Solution

03 - Kelvinator Washing Machine Lid Switch Assembly

On some models the lid switch assembly prevents the washer from both spinning and agitating when the lid is open. If the lid switch assembly fails, the washer will not spin or agitate. To determine if the lid switch assembly is defective, use a multimeter to test the lid switch for continuity. If the lid switch does not have continuity when the lid is closed, replace it.
Top Solution

04 - Lid Not Fully Closed

On most top load machines the washer will not agitate or spin without the lid being fully closed. Close the lid after loading the washer and ensure there are no obstructions preventing the lid strike from connecting to the lid switch or latch.
Top Solution

05 - Kelvinator Washing Machine Motor Coupling

The motor coupling connects the motor to the washer transmission. If the washer is overloaded, the motor coupling will fail in order to protect both the motor and transmission. The motor coupling can also fail due to normal wear. Inspect the motor coupling to determine if it is broken. If the motor coupling is broken, replace it.
Highly Likely

06 - Kelvinator Washing Machine Drive Belt

Inspect the drive belt to determine if it is broken or if it is loose on the pulleys. If the drive belt is broken or loose, replace it.
Highly Likely

Frequently Asked Questions

Why won't my Kelvinator washer agitate?
What should I check if my washer won't agitate but will spin?
Why won't my Kelvinator washer agitate or spin?
Can a broken motor coupling or drive belt keep a washer from agitating?
How do I find the correct Kelvinator washer agitator part?

Shop by Kelvinator Washing Machine Parts