If your RCA washer won't agitate, the agitator repair kit is the most likely place to start. Worn, stripped, or damaged agitator components can prevent the agitator from moving even when the washer motor runs. Next, inspect the drive block or bell, which connects the transmission shaft to the agitator and can cause the agitator to move only slightly or not at all when worn. A failed lid switch assembly can also stop the washer from agitating and spinning, so test the switch for continuity with the lid closed. Make sure the lid is fully closed and that nothing blocks the lid strike from engaging the switch or latch. If these parts check out, inspect the motor coupling for breakage caused by overloading or normal wear, then check whether the drive belt is broken or loose on the pulleys. These are common causes of washing machine agitator problems and a washer not agitating. Enter your RCA washer model number to find the exact replacement part that fits your specific machine.
01 - RCA Washing Machine Agitator Repair Kit
If the washer won't agitate, replacing the agitator repair kit may solve the problem. The kit contains the agitator components that are most likely to wear out and/or fail. If any of the parts are worn out, stripped, or damaged, replace the kit.
Enter model number to search for the required part specific to your product
The drive block connects the washer transmission to the agitator. If the drive block is worn out, the transmission shaft will still move back and forth, but the agitator will only move slightly or will not move at all. Inspect the drive block for damage. If the drive block is worn out, stripped, or damaged, replace it.
On some models the lid switch assembly prevents the washer from both spinning and agitating when the lid is open. If the lid switch assembly fails, the washer will not spin or agitate. To determine if the lid switch assembly is defective, use a multimeter to test the lid switch for continuity. If the lid switch does not have continuity when the lid is closed, replace it.
On most top load machines the washer will not agitate or spin without the lid being fully closed. Close the lid after loading the washer and ensure there are no obstructions preventing the lid strike from connecting to the lid switch or latch.
Top Solution
05 - RCA Washing Machine Motor Coupling
The motor coupling connects the motor to the washer transmission. If the washer is overloaded, the motor coupling will fail in order to protect both the motor and transmission. The motor coupling can also fail due to normal wear. Inspect the motor coupling to determine if it is broken. If the motor coupling is broken, replace it.