Is your E-Wave washer leaking water? Start by checking the drain pump, the most likely source. A cracked pump, damaged housing, or worn pump bearings can allow water to escape, and the drain pump must be replaced rather than repaired. Next, inspect the washer hoses, including the tub-to-pump hoses, for cracks, loose connections, or other damage. A torn tub seal can also cause a washing machine leak, often allowing water to reach the tub bearings. When the tub seal leaks, replace the tub seal and tub bearing kit together, although this repair requires substantial washer disassembly. If the leak is near the front, make sure the dispenser drawer is fully closed and check it for cracks or damage. On a front load washer, using the wrong detergent or too much detergent can create excess suds that escape through the overflow system. Use only HE detergent and follow the recommended amount. Enter your model number to find the exact replacement drain pump, hose, tub seal, bearing kit, or dispenser drawer for your specific washing machine.
01 - E-Wave Washing Machine Drain Pump
The drain pump pumps water out the drain hose. If the drain pump is cracked or damaged, or if the bearings are worn out, the drain pump may leak water. The drain pump is not repairable—if the pump is leaking water, replace it.
Enter model number to search for the required part specific to your product
Hoses apart from the fill hose or drain hose could be reponsible for a leaking washer. You should inspect all of the appliance's hoses, such as tub-to-pump hoses, for damage or loose connections and replace if necessary.
03 - E-Wave Washing Machine Tub Seal and Bearing Kit
The tub seal might be torn, causing water to leak from the seal. If the tub seal is leaking water, water may leak through the tub seal and into the tub bearings. This can cause the bearings to fail. For this reason, if the tub seal is leaking water, replace both the tub seal and the tub bearings. Be aware that this is a complicated repair and will require disassembling most of the washer.
The tub seal might be torn, causing water to leak from the seal. If the tub seal is leaking water, water may leak through the tub seal and into the tub bearings. This can cause the bearings to fail. For this reason, if the tub seal is leaking water, replace both the tub seal and the tub bearings. Be aware that this is a complicated repair and will require disassembling most of the washer.
If a washer is leaking water, you should confirm the dispenser drawer is completely closed and free of damage. If the drawer is cracked, the component could be responsible for the leak and should be replaced.
If you have a front-load washer, be certain that you are using an HE - high efficiency - detergent. HE detergent is formulated to be low-sudsing and to be used with the lower water levels utilized by front-load washers. Front-load washers have a small overflow system usually on the back of the appliance. If you have too many suds, they are probably escaping from there.
Highly Likely
Frequently Asked Questions
Why is my E-Wave washer leaking from the bottom?
How do I find the source of a leaking E-Wave washing machine?
Can a damaged dispenser drawer cause my E-Wave washer to leak?
Why is my front-load E-Wave washer leaking water when it uses the correct parts?
How do I identify and buy the correct E-Wave washer leak repair part?
Unlock the Right Part for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.