Choose Product
Identify Problem
03
Find Solutions

Danby Washer leaking water

When your Danby washer is leaking, start by finding where the water appears and when it leaks. The most likely cause is a cracked or damaged drain pump, or worn pump bearings, which can make your washing machine leak from the bottom while draining. Because a leaking drain pump is not repairable, replace the pump. Next, inspect the washer's hoses, including the tub-to-pump hose, for cracks, loose connections, or other damage. A torn tub seal can also cause a washing machine leak and allow water to reach the tub bearings. If the tub seal is leaking, replace the tub seal and tub bearing kit together. This is a major repair that requires disassembling much of the washer. Also check that the dispenser drawer is fully closed and not cracked. On a front-load Danby washer, using the wrong detergent or too much detergent can create excessive suds that escape through the overflow system and cause washer leaking. Enter your model number to find the exact drain pump, hose, tub seal, bearing kit, or dispenser drawer for your specific Danby washing machine.

01 - Danby Washing Machine Drain Pump

The drain pump pumps water out the drain hose. If the drain pump is cracked or damaged, or if the bearings are worn out, the drain pump may leak water. The drain pump is not repairable—if the pump is leaking water, replace it.
Enter model number to search for the required part specific to your product
Top Solution

02 - Danby Washing Machine Hose

Hoses apart from the fill hose or drain hose could be reponsible for a leaking washer. You should inspect all of the appliance's hoses, such as tub-to-pump hoses, for damage or loose connections and replace if necessary.
Top Solution

03 - Danby Washing Machine Tub Seal and Bearing Kit

The tub seal might be torn, causing water to leak from the seal. If the tub seal is leaking water, water may leak through the tub seal and into the tub bearings. This can cause the bearings to fail. For this reason, if the tub seal is leaking water, replace both the tub seal and the tub bearings. Be aware that this is a complicated repair and will require disassembling most of the washer.
Top Solution

04 - Danby Washing Machine Tub Seal

The tub seal might be torn, causing water to leak from the seal. If the tub seal is leaking water, water may leak through the tub seal and into the tub bearings. This can cause the bearings to fail. For this reason, if the tub seal is leaking water, replace both the tub seal and the tub bearings. Be aware that this is a complicated repair and will require disassembling most of the washer.
Top Solution

05 - Danby Washing Machine Dispenser Drawer

If a washer is leaking water, you should confirm the dispenser drawer is completely closed and free of damage. If the drawer is cracked, the component could be responsible for the leak and should be replaced.
Top Solution

06 - Wrong type or incorrect amount of detergent

If you have a front-load washer, be certain that you are using an HE - high efficiency - detergent. HE detergent is formulated to be low-sudsing and to be used with the lower water levels utilized by front-load washers. Front-load washers have a small overflow system usually on the back of the appliance. If you have too many suds, they are probably escaping from there.
Highly Likely

Frequently Asked Questions

Why is my Danby washer leaking water from the bottom?
How do I know if the drain pump is causing my Danby washing machine leak?
Can a tub seal cause a Danby front load washer to leak?
Can detergent cause my Danby washer to leak water?
How do I find the correct replacement part for my leaking Danby washer?