Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeChoose Product
Identify Problem
03
Find Solutions
HomeRepair HelpAdmiral Washer RepairAdmiral Washer won't start Repair
Admiral Washer won't start
An Admiral washer won't start, but the cause is often simple to check. First, confirm both the hot and cold water supply valves are fully open. If the washer isn't filling, it may not begin the cycle. Next, inspect the user control and display board. If some control panel buttons work while others do not, or the display is blank even though the board has power, the board may be defective. A faulty timer can also keep the washing machine from starting, but test it for continuity with a multimeter and consult the wiring diagram before replacing it. Make sure the washer door or lid is completely closed, since the door latch, lid switch, or lid lock must signal that it is safe to run. If your washer has power but won't start, test the line fuse for continuity and check for shorted wires, the drive motor, or drain pump before installing a new fuse. Enter your Admiral washer's model number to find the exact replacement part for your specific washing machine.
01 - Water Supply Valves are Closed
Confirm that both the hot and cold water supply valves are open. If the valves are closed the washer won't fill to start the wash cycle.
Top Solution
02 - Admiral Washing Machine User Control and Display Board
To determine if the user control and display board is defective, try pressing the buttons on the control panel. If some of the buttons work, but others do not work, the control and display board might need to be replaced. Additionally, if the display is not working, check the power to the user control and display board. If the user control and display board has power, but it isn’t working, replace it.
Enter model number to search for the required part specific to your product
Top Solution
03 - Admiral Washing Machine Timer
The timer is frequently misdiagnosed—before replacing the timer, first check all of the more commonly defective parts. To determine if the timer is defective, consult your washer’s wiring diagram and use a multimeter to test the timer for continuity.
Top Solution
04 - Door or lid is open
Make sure the door or lid is closed. Most machines will not run with the door or lid open.
Top Solution
05 - Door is Open
Make sure the door is closed. The washer will not run with the door open.
Top Solution
06 - Admiral Washing Machine Line Fuse
The line fuse blows if the washer circuits are overloaded. If the line fuse blows, the washer won’t start. To determine if the line fuse is at fault, use a multimeter to test it for continuity. If the fuse does not have continuity, replace it. In addition, you should investigate and resolve the problem that caused the fuse to blow. Check for shorted out components such as the wires, motor, or drain pump. If you don’t resolve the underlying issue, the new fuse will blow too.
Highly Likely
Frequently Asked Questions
Why won't my Admiral washer start even though it has power?
What should I check if my Admiral washer controls are not working?
How do I test the line fuse on an Admiral washing machine that won't start?
Could the timer be causing my Admiral washer not to start?
How do I find the correct replacement part for my Admiral washer?
Shop by Admiral Washing Machine Parts
Shop by Popular Admiral Washing Machine Models
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com