Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeChoose Product
Identify Problem
03
Find Solutions
HomeRepair HelpMontgomery Wards Washer RepairMontgomery Wards Washer won't start Repair
Montgomery Wards Washer won't start
If your Montgomery Wards washer won't start, first confirm both the hot and cold water supply valves are fully open. A washer may not begin the cycle if it cannot fill. Next, check the user control and display board by pressing the control panel buttons. If some buttons work while others do not, or the display is blank even though the board has power, the user interface board may be defective. The timer is another possible cause, but it is often misdiagnosed, so test it for continuity with a multimeter using the washer's wiring diagram. Make sure the door or lid is completely closed, since the machine will not run when the door or lid is open. If the washer still won't start, test the line fuse for continuity. A blown fuse can result from a shorted wire, motor, or drain pump, so correct the underlying problem before installing a replacement. Enter your model number to find the exact Montgomery Wards replacement part for your specific washing machine, including a control board, timer, door or lid component, or line fuse.
01 - Water Supply Valves are Closed
Confirm that both the hot and cold water supply valves are open. If the valves are closed the washer won't fill to start the wash cycle.
Top Solution
02 - Montgomery Wards Washing Machine User Control and Display Board
To determine if the user control and display board is defective, try pressing the buttons on the control panel. If some of the buttons work, but others do not work, the control and display board might need to be replaced. Additionally, if the display is not working, check the power to the user control and display board. If the user control and display board has power, but it isn’t working, replace it.
Enter model number to search for the required part specific to your product
Top Solution
03 - Montgomery Wards Washing Machine Timer
The timer is frequently misdiagnosed—before replacing the timer, first check all of the more commonly defective parts. To determine if the timer is defective, consult your washer’s wiring diagram and use a multimeter to test the timer for continuity.
Top Solution
04 - Door or lid is open
Make sure the door or lid is closed. Most machines will not run with the door or lid open.
Top Solution
05 - Door is Open
Make sure the door is closed. The washer will not run with the door open.
Top Solution
06 - Montgomery Wards Washing Machine Line Fuse
The line fuse blows if the washer circuits are overloaded. If the line fuse blows, the washer won’t start. To determine if the line fuse is at fault, use a multimeter to test it for continuity. If the fuse does not have continuity, replace it. In addition, you should investigate and resolve the problem that caused the fuse to blow. Check for shorted out components such as the wires, motor, or drain pump. If you don’t resolve the underlying issue, the new fuse will blow too.
Highly Likely
Frequently Asked Questions
Why won't my Montgomery Wards washer start?
What should I check if my washer has power but won't start?
How do I test a Montgomery Wards washer timer or line fuse?
Can a closed water valve keep my washing machine from starting?
How do I find the correct Montgomery Wards washer part?
Shop by Montgomery Wards Washing Machine Parts
Shop by Popular Montgomery Wards Washing Machine Models
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com