Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeChoose Product
Identify Problem
03
Find Solutions
HomeRepair HelpDanby Washer RepairDanby Washer won't start Repair
Danby Washer won't start
When your Danby washer won't start, first confirm that both the hot and cold water supply valves are fully open. A washer may not begin the cycle if it cannot fill. If the washer not starting problem continues, check the user control and display board. Buttons that work intermittently or a display that stays blank can indicate a defective board, provided it is receiving power. The timer is another possible cause, but it is often misdiagnosed, so test it for continuity according to the wiring diagram before replacing it. Make sure the door or lid is completely closed because Danby washing machines will not run when the door or lid is open. Finally, test the line fuse with a multimeter. If it has no continuity, replace it, but also inspect for shorted wires, the motor, or the drain pump that may have caused the fuse to blow. Whether your washing machine won't turn on or has power but won't start, enter your model number to find the exact replacement part for your specific Danby washing machine.
01 - Water Supply Valves are Closed
Confirm that both the hot and cold water supply valves are open. If the valves are closed the washer won't fill to start the wash cycle.
Top Solution
02 - Danby Washing Machine User Control and Display Board
To determine if the user control and display board is defective, try pressing the buttons on the control panel. If some of the buttons work, but others do not work, the control and display board might need to be replaced. Additionally, if the display is not working, check the power to the user control and display board. If the user control and display board has power, but it isn’t working, replace it.
Enter model number to search for the required part specific to your product
Top Solution
03 - Danby Washing Machine Timer
The timer is frequently misdiagnosed—before replacing the timer, first check all of the more commonly defective parts. To determine if the timer is defective, consult your washer’s wiring diagram and use a multimeter to test the timer for continuity.
Top Solution
04 - Door or lid is open
Make sure the door or lid is closed. Most machines will not run with the door or lid open.
Top Solution
05 - Door is Open
Make sure the door is closed. The washer will not run with the door open.
Top Solution
06 - Danby Washing Machine Line Fuse
The line fuse blows if the washer circuits are overloaded. If the line fuse blows, the washer won’t start. To determine if the line fuse is at fault, use a multimeter to test it for continuity. If the fuse does not have continuity, replace it. In addition, you should investigate and resolve the problem that caused the fuse to blow. Check for shorted out components such as the wires, motor, or drain pump. If you don’t resolve the underlying issue, the new fuse will blow too.
Highly Likely
Frequently Asked Questions
Why won't my Danby washer start even though it has power?
How do I know if the door lock or lid switch is stopping my Danby washer from starting?
How can I test the line fuse on a Danby washing machine that won't start?
Should I replace the timer or control board if my Danby washer won't start?
How do I find the correct replacement part for my Danby washer?
Shop by Danby Washing Machine Parts
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com