Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeChoose Product
Identify Problem
03
Find Solutions
HomeRepair HelpTappan Washer RepairTappan Washer won't start Repair
Tappan Washer won't start
Is your Tappan washer not starting? If your washer won't start or your washing machine won't turn on, first confirm both the hot and cold water supply valves are fully open. Closed valves can prevent the washer from filling and beginning the cycle. Next, check the user control and display board. If some buttons work while others do not, or the display is blank despite receiving power, the control board may be defective. A faulty timer can also keep the washer from starting, but test the more common causes first, then use the wiring diagram and a multimeter to check the timer for continuity. Make sure the door or lid is firmly closed because the washer will not run when the door is open. Finally, test the line fuse for continuity. If it has failed, inspect the wiring, motor, and drain pump for a short or overload before installing a replacement. Enter your model number to find the exact replacement control board, timer, line fuse, or other Tappan washer part for your specific machine.
01 - Water Supply Valves are Closed
Confirm that both the hot and cold water supply valves are open. If the valves are closed the washer won't fill to start the wash cycle.
Top Solution
02 - Tappan Washing Machine User Control and Display Board
To determine if the user control and display board is defective, try pressing the buttons on the control panel. If some of the buttons work, but others do not work, the control and display board might need to be replaced. Additionally, if the display is not working, check the power to the user control and display board. If the user control and display board has power, but it isn’t working, replace it.
Enter model number to search for the required part specific to your product
Top Solution
03 - Tappan Washing Machine Timer
The timer is frequently misdiagnosed—before replacing the timer, first check all of the more commonly defective parts. To determine if the timer is defective, consult your washer’s wiring diagram and use a multimeter to test the timer for continuity.
Top Solution
04 - Door or lid is open
Make sure the door or lid is closed. Most machines will not run with the door or lid open.
Top Solution
05 - Door is Open
Make sure the door is closed. The washer will not run with the door open.
Top Solution
06 - Tappan Washing Machine Line Fuse
The line fuse blows if the washer circuits are overloaded. If the line fuse blows, the washer won’t start. To determine if the line fuse is at fault, use a multimeter to test it for continuity. If the fuse does not have continuity, replace it. In addition, you should investigate and resolve the problem that caused the fuse to blow. Check for shorted out components such as the wires, motor, or drain pump. If you don’t resolve the underlying issue, the new fuse will blow too.
Highly Likely
Frequently Asked Questions
Why won't my Tappan washer start even though it has power?
How do I know if the Tappan washer door or lid switch is bad?
Could the user control and display board keep my Tappan washer from starting?
How can I test the Tappan washer line fuse or timer?
How do I find the correct Tappan washer replacement part?
Shop by Tappan Washing Machine Parts
Shop by Popular Tappan Washing Machine Models
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com