Choose Product
Identify Problem
03
Find Solutions

Maytag Washer door or lid won't lock/unlock

When your Maytag washer lid won't lock, washer door won't unlock, or the machine will not start because the door or lid stays stuck, inspect the parts that align and secure the latch. The most likely cause is a damaged or missing door boot seal retaining ring, which can pull the boot seal away from the front panel and keep a front-load door from closing correctly. On top-load models, a damaged or misaligned washing machine lid can prevent the lid strike from lining up with the lock. A torn or displaced door boot seal can cause the same problem on front-load washers. Next, check the lid lock or door lock for mechanical damage or an electrical failure. A defective lock can keep the washer from operating, including spinning or starting. If the strike does not align with the lock, inspect the door hinge or lid hinge for bending or misalignment. A damaged door lock assembly may also need replacement. Unplug the washer before inspecting parts, and use a multimeter to test the lock switches when appropriate. Enter your Maytag washer model number to find the exact replacement part for your specific washing machine.

01 - Maytag Washing Machine Boot Seal Retaining Ring

A washer door boot seal retaining ring is the component that secures the door boot seal to the front panel on front-load washing machines. If the retaining ring is damaged or missing, the boot seal can become detached from the panel and prevent the door from closing and locking properly. If the retaining ring is missing or broken, you should install a new one.
Enter model number to search for the required part specific to your product
Top Solution

02 - Maytag Washing Machine Lid

If the washing machine's lid is damaged or misaligned, the lid strike won't be able to line up with the lock or latch when you attempt to close the lid. Inspect the lid for damage and replace if necessary.
Top Solution

03 - Maytag Washing Machine Door Boot Seal

If the door boot seal on front-load washers is damaged or becomes misaligned, it can prevent the door from closing and locking properly. Inspect the door boot seal for any damage and replace the seal if required.
Top Solution

04 - Maytag Washing Machine Lock

The door or lid lock secures the washer door or lid during operation. Once the door or lid is closed, the washer can begin operating. If the door or lid is not latched shut, the door switch will prevent the washer from operating. If the lock is defective, the washer will not spin or start. The lock can fail either mechanically or electrically. Inspect the lock for damage. If the lock is damaged or does not latch properly, replace it. To determine if the lock has failed electrically, consult your washer’s wiring diagram and use a multimeter to test each of the lock switches, if applicable, for continuity.
Top Solution

05 - Maytag Washing Machine Door Hinge

If the washing machine's lid strike or door strike does not line up with the lock or latch when you attempt to close the lid or door, it's likely the lid hinge or door hinge is bent or misaligned. This can prevent the door or lid from locking. Inspect the hinge for damage and replace if necessary.
Highly Likely

06 - Maytag Washing Machine Door Lock

The door lock assembly might be defective. Inspect the door lock for damage. If the door lock is damaged, replace it.
Highly Likely

Frequently Asked Questions

Why won't my Maytag washer door or lid lock?
Can a bad lid lock or door lock keep my Maytag washer from starting or spinning?
What should I check if my Maytag washer door will not unlock?
How can I tell whether the Maytag washer lid strike, hinge, or boot seal is causing the lock problem?
How do I find the correct Maytag washer door lock or lid lock replacement part?

Shop by Maytag Washing Machine Parts