Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeChoose Product
Identify Problem
03
Find Solutions
HomeRepair HelpGaggenau Washer RepairGaggenau Washer filling when not in use Repair
Gaggenau Washer filling when not in use
If you have a Gaggenau washer filling with water when off, the water inlet valve is the most likely cause. This valve should close when the washing machine is not running, but a defective valve can allow water to leak into the drum, especially when household water pressure is adequate. Check the supply pressure first, since the valve needs at least 20 psi to operate and shut off properly. Low water pressure, a clogged whole-house filter, or restricted plumbing can prevent the valve from closing fully. If the pressure is low at several faucets, contact your water supplier or a plumber. Clogged screens in the fill hoses or water inlet valve are another common cause of a washer filling when not in use. Unplug the Gaggenau washing machine, shut off the hot and cold water supplies, remove the hoses, and clean any debris from the screens. If cleaning and pressure checks do not solve the problem, replace the water inlet valve. Enter your model number to find the exact replacement part for your specific Gaggenau washing machine.
01 - Gaggenau Washing Machine Water Inlet Valve
The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires at least 20 psi to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, replace the water inlet valve.
Enter model number to search for the required part specific to your product
Top Solution
02 - Low Water Pressure from House Supply
The water inlet valve requires good water pressure to shut off properly. If the home's water pressure is too low, the valve may not close fully after the power is shut off causing water to leak into the washer when not in use. If you have a whole house filter it may be clogged and the filter needs to be replaced. If the water pressure is low at all the faucets, you may need to call your local water supplier to determine if the water pressure is sufficient.
Highly Likely
03 - Clogged Screens in Fill Hose or Water Inlet Valve
All water valves have filter screens to prevent particles from clogging the valve or stop the valve from closing. For added protection and easier access, some fill hoses may have screens added to the hose washers/gaskets where the fill hose connects to the homes hot or cold shut-off valve. The screens in the water valve and hoses should be checked and cleaned if necessary. Unplug the machine. Turn off the water supply valves. Get a bucket to catch the remaining water in the hoses. Unthread the hoses from your machine and clean any debris from the filter screens.
Common
Frequently Asked Questions
Why is my Gaggenau washer filling with water when it is off?
How do I stop my washing machine from filling when not in use?
Can I test the Gaggenau water inlet valve with a multimeter?
How do I clean clogged water inlet valve or fill hose screens?
How do I find the correct Gaggenau washer water inlet valve?
Shop by Gaggenau Washing Machine Parts
Shop by Popular Gaggenau Washing Machine Models
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com