Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeChoose Product
Identify Problem
03
Find Solutions
HomeRepair HelpDanby Washer RepairDanby Washer filling when not in use Repair
Danby Washer filling when not in use
When your Danby washer is filling with water when off, the water inlet valve is the most likely cause. This valve should shut completely when the cycle ends, but a defective valve can allow water to seep into the tub, causing a washing machine to fill with water when not in use. Before replacing it, check your home's water pressure. The inlet valve needs at least 20 psi to operate and close properly. Low pressure, often caused by a clogged whole-house filter, can leave the valve partially open and lead to a washer filling with water when off. If pressure is adequate, inspect the screens in the fill hoses and water inlet valve. Shut off the water, unplug the washer, disconnect the hoses over a bucket, and clean away any debris blocking the screens. If the problem continues, replace the water inlet valve. Enter your Danby washer's model number to find the exact replacement part for your specific washing machine. This helps match the correct valve and ensures the repair fits your model.
01 - Danby Washing Machine Water Inlet Valve
The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires at least 20 psi to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, replace the water inlet valve.
Enter model number to search for the required part specific to your product
Top Solution
02 - Low Water Pressure from House Supply
The water inlet valve requires good water pressure to shut off properly. If the home's water pressure is too low, the valve may not close fully after the power is shut off causing water to leak into the washer when not in use. If you have a whole house filter it may be clogged and the filter needs to be replaced. If the water pressure is low at all the faucets, you may need to call your local water supplier to determine if the water pressure is sufficient.
Highly Likely
03 - Clogged Screens in Fill Hose or Water Inlet Valve
All water valves have filter screens to prevent particles from clogging the valve or stop the valve from closing. For added protection and easier access, some fill hoses may have screens added to the hose washers/gaskets where the fill hose connects to the homes hot or cold shut-off valve. The screens in the water valve and hoses should be checked and cleaned if necessary. Unplug the machine. Turn off the water supply valves. Get a bucket to catch the remaining water in the hoses. Unthread the hoses from your machine and clean any debris from the filter screens.
Common
Frequently Asked Questions
Why is my Danby washing machine filling with water when it's off?
How do I test a washing machine water inlet valve?
Can low water pressure make my washer keep filling when it is not in use?
How do I clean clogged washer fill hose and inlet valve screens?
How do I find the correct Danby washer water inlet valve?
Shop by Danby Washing Machine Parts
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com