Choose Product
Identify Problem
03
Find Solutions

Amana Washer has a burning smell

When your Amana washer has a burning smell, smells like burning rubber, or produces an overheating smell during operation, stop the cycle, unplug the machine, and inspect it before using it again. The most likely cause is a failed rotor and stator kit. Wet stator coils or shorted coated wires can overheat and create a washing machine burning smell, especially during the spin cycle. Next, check the main control board, motor control board, and control board for shorted components or visible burn marks caused by a power surge. A worn water pump belt can slip on the pulleys, while a frayed drive belt can slide against the pulley and create friction. Check that the water pump, motor pulley, and idler pulley turn freely, since a seized component can make the belt overheat or smoke. Do not operate the washer if you see smoke or scorched wiring. Enter your Amana washer model number to find the exact replacement rotor and stator kit, control board, motor control board, water pump belt, or drive belt for your specific washing machine.

01 - Amana Washing Machine Rotor and Stator Kit

The stator is part of a direct drive motor that electrically drives the outer rotor. If the stator coils become wet or the coated wires on the coils short out, they can produce a burning smell. You can test the stator coils with a meter. If the stator is smoking, or smells burnt, it will need to be replaced.
Enter model number to search for the required part specific to your product
Top Solution

02 - Amana Washing Machine Main Control Board

The main control board provides power to the various components of the washer. If the control board receives a power surge, or a component fails, the control board can short-out causing a burning smell. Inspect the control board for burn marks. A burnt main control board will need to be replaced.
Top Solution

03 - Amana Washing Machine Motor Control Board

The motor control board sends power to the motor. If the motor shorts out or a power surge occurs components on the board can blow out causing a burning smell. Inspect the motor control board for burn marks and replace if necessary.
Top Solution

04 - Amana Washing Machine Control Board

The control board provides power to the components of the washer. If the control board receives a power surge or a component fails, the control board can short out causing a burning smell. Inspect the control board for burn marks. If the control board is burnt, it will need to be replaced.
Top Solution

05 - Amana Washing Machine Water Pump Belt

The water pump belt can get worn and slip on the pulleys causing a burning smell. Check the motor pulley for wear and make sure the water pump turns freely.
Top Solution

06 - Amana Washing Machine Drive Belt

If the drive belt is worn or frayed it can slip on the pulley causing friction and a burning smell. Also check the components the belt is turning to make sure they turn freely. A stuck water pump or idler pulley can create enough friction to cause the belt to burn.
Top Solution

Frequently Asked Questions

What should I do if my Amana washer has a burning smell?
Can a worn drive belt cause my washing machine to smell like burning rubber?
Why is my Amana washer making a burning smell during the wash or spin cycle?
Could a control board cause a burning smell in my Amana washing machine?
How do I find the correct replacement part for my Amana washer?

Shop by Amana Washing Machine Parts