Choose Product
Identify Problem
03
Find Solutions

Electrolux Washer has a burning smell

If your Electrolux washer has a burning smell, stop the cycle, unplug the machine, and inspect it before using it again. The most likely cause is a failed rotor and stator kit. Wet stator coils or shorted wires can overheat and produce a washer burning smell or washing machine burning smell. Next, inspect the main control board for burn marks caused by a power surge or failed component. The motor control board can also short or burn because it supplies power to the drive motor. A damaged control board may show similar signs. If the smell is more like burning rubber, check the water pump belt for wear or slipping and make sure the pump and motor pulley turn freely. A worn, frayed, or slipping drive belt is another common cause, especially if a stuck water pump or idler pulley creates excess friction. Do not operate the washer if you see smoke, melted wiring, or severe scorching. Enter your Electrolux washer's model number to find the exact replacement rotor and stator kit, board, water pump belt, or drive belt for your specific machine.

01 - Electrolux Washing Machine Rotor and Stator Kit

The stator is part of a direct drive motor that electrically drives the outer rotor. If the stator coils become wet or the coated wires on the coils short out, they can produce a burning smell. You can test the stator coils with a meter. If the stator is smoking, or smells burnt, it will need to be replaced.
Enter model number to search for the required part specific to your product
Top Solution

02 - Electrolux Washing Machine Main Control Board

The main control board provides power to the various components of the washer. If the control board receives a power surge, or a component fails, the control board can short-out causing a burning smell. Inspect the control board for burn marks. A burnt main control board will need to be replaced.
Top Solution

03 - Electrolux Washing Machine Motor Control Board

The motor control board sends power to the motor. If the motor shorts out or a power surge occurs components on the board can blow out causing a burning smell. Inspect the motor control board for burn marks and replace if necessary.
Top Solution

04 - Electrolux Washing Machine Control Board

The control board provides power to the components of the washer. If the control board receives a power surge or a component fails, the control board can short out causing a burning smell. Inspect the control board for burn marks. If the control board is burnt, it will need to be replaced.
Top Solution

05 - Electrolux Washing Machine Water Pump Belt

The water pump belt can get worn and slip on the pulleys causing a burning smell. Check the motor pulley for wear and make sure the water pump turns freely.
Top Solution

06 - Electrolux Washing Machine Drive Belt

If the drive belt is worn or frayed it can slip on the pulley causing friction and a burning smell. Also check the components the belt is turning to make sure they turn freely. A stuck water pump or idler pulley can create enough friction to cause the belt to burn.
Top Solution

Frequently Asked Questions

Why does my Electrolux washer smell like burning rubber?
What should I check first when my Electrolux washing machine smells like burning?
Can a washer stator cause a burning smell, and how do I test it?
Could a control board be causing my Electrolux washer to smell like burning?
How do I find the correct replacement belt, stator, or control board for my Electrolux washer?

Shop by Electrolux Washing Machine Parts