Choose Product
Identify Problem
03
Find Solutions

Danby Washer has a burning smell

If your Danby washer has a burning smell, unplug it before inspecting the machine. The most likely cause is a failed rotor and stator kit. Wet stator coils, shorted coated wires, or a smoking stator can create a washer burning smell, and the coils can be tested with a meter. Next, inspect the main control board, motor control board, and control board for burn marks caused by a power surge or failed component. A worn water pump belt can slip on the motor pulley, while a worn or frayed drive belt can create friction and a washer smells like burning complaint. Check that the water pump, motor pulley, and idler pulley turn freely, since a stuck component can make either belt overheat. These are common causes of a washing machine burning smell, but the exact repair depends on your Danby model and the evidence you find. Enter your model number to find the exact replacement part for your specific washing machine, including a rotor and stator kit, control board, motor control board, water pump belt, or drive belt.

01 - Danby Washing Machine Rotor and Stator Kit

The stator is part of a direct drive motor that electrically drives the outer rotor. If the stator coils become wet or the coated wires on the coils short out, they can produce a burning smell. You can test the stator coils with a meter. If the stator is smoking, or smells burnt, it will need to be replaced.
Enter model number to search for the required part specific to your product
Top Solution

02 - Danby Washing Machine Main Control Board

The main control board provides power to the various components of the washer. If the control board receives a power surge, or a component fails, the control board can short-out causing a burning smell. Inspect the control board for burn marks. A burnt main control board will need to be replaced.
Top Solution

03 - Danby Washing Machine Motor Control Board

The motor control board sends power to the motor. If the motor shorts out or a power surge occurs components on the board can blow out causing a burning smell. Inspect the motor control board for burn marks and replace if necessary.
Top Solution

04 - Danby Washing Machine Control Board

The control board provides power to the components of the washer. If the control board receives a power surge or a component fails, the control board can short out causing a burning smell. Inspect the control board for burn marks. If the control board is burnt, it will need to be replaced.
Top Solution

05 - Danby Washing Machine Water Pump Belt

The water pump belt can get worn and slip on the pulleys causing a burning smell. Check the motor pulley for wear and make sure the water pump turns freely.
Top Solution

06 - Danby Washing Machine Drive Belt

If the drive belt is worn or frayed it can slip on the pulley causing friction and a burning smell. Also check the components the belt is turning to make sure they turn freely. A stuck water pump or idler pulley can create enough friction to cause the belt to burn.
Top Solution

Frequently Asked Questions

What should I do if my Danby washer has a burning smell or starts smoking?
Why does my Danby washer smell like burning rubber during the spin cycle?
How do I test the rotor and stator when my Danby washing machine smells burning?
Should I replace the control board if my Danby washer has a burning smell?
How can I find the correct replacement part for my Danby washer?