Choose Product
Identify Problem
03
Find Solutions

Inglis Washer has a burning smell

If your Inglis washer has a burning smell, stop using it, unplug the machine, and inspect the drive system and electrical components before running another cycle. The most likely cause is a failed rotor and stator kit. The stator coils can become wet or short out, producing a washer burning smell, smoke, or a burnt odor. Next, check the main control board, motor control board, and control board for power-surge damage, failed components, or visible burn marks. A damaged board can cause a washing machine burning smell even when the washer still has power. If the electrical parts look normal, inspect the water pump belt and drive belt. A worn, frayed, or slipping belt can create friction and smell like burning rubber, especially if the water pump or idler pulley is seized or difficult to turn. Test the stator coils with a meter when appropriate, and replace any smoking, burnt, or damaged part. Enter your Inglis washer's model number to find the exact replacement rotor and stator kit, control board, motor control board, water pump belt, or drive belt for your specific washing machine.

01 - Inglis Washing Machine Rotor and Stator Kit

The stator is part of a direct drive motor that electrically drives the outer rotor. If the stator coils become wet or the coated wires on the coils short out, they can produce a burning smell. You can test the stator coils with a meter. If the stator is smoking, or smells burnt, it will need to be replaced.
Enter model number to search for the required part specific to your product
Top Solution

02 - Inglis Washing Machine Main Control Board

The main control board provides power to the various components of the washer. If the control board receives a power surge, or a component fails, the control board can short-out causing a burning smell. Inspect the control board for burn marks. A burnt main control board will need to be replaced.
Top Solution

03 - Inglis Washing Machine Motor Control Board

The motor control board sends power to the motor. If the motor shorts out or a power surge occurs components on the board can blow out causing a burning smell. Inspect the motor control board for burn marks and replace if necessary.
Top Solution

04 - Inglis Washing Machine Control Board

The control board provides power to the components of the washer. If the control board receives a power surge or a component fails, the control board can short out causing a burning smell. Inspect the control board for burn marks. If the control board is burnt, it will need to be replaced.
Top Solution

05 - Inglis Washing Machine Water Pump Belt

The water pump belt can get worn and slip on the pulleys causing a burning smell. Check the motor pulley for wear and make sure the water pump turns freely.
Top Solution

06 - Inglis Washing Machine Drive Belt

If the drive belt is worn or frayed it can slip on the pulley causing friction and a burning smell. Also check the components the belt is turning to make sure they turn freely. A stuck water pump or idler pulley can create enough friction to cause the belt to burn.
Top Solution

Frequently Asked Questions

What should I do if my Inglis washer has a burning smell or smells like burning rubber?
Why is my Inglis washer making a burning smell during the spin cycle?
How do I test the rotor and stator on an Inglis washing machine?
Could a control board cause my Inglis washer to smell like it is burning?
How do I find the correct replacement belt, pump, or rotor and stator kit for my Inglis washer?

Shop by Inglis Washing Machine Parts