If your Kelvinator washer has a burning smell, disconnect power and inspect it before running another cycle. A washing machine burning smell most often comes from the direct-drive rotor and stator kit, especially if the stator coils become wet or short out. Test the stator coils with a meter, and replace the kit if it smokes or smells burnt. Next, inspect the main control board for burn marks, since a power surge or failed component can cause it to short. The motor control board can also burn out if the motor shorts or a surge occurs, while another control board may show similar damage. If the electrical parts look normal, check the water pump belt for wear or slipping and make sure the pump turns freely. Then inspect the drive belt for fraying or friction caused by a stuck water pump or idler pulley. A washer that smells like burning rubber may need a belt or pulley repair, but smoking or visible electrical damage requires immediate replacement of the failed part. Enter your Kelvinator washer model number to find the exact replacement part for your machine.
01 - Kelvinator Washing Machine Rotor and Stator Kit
The stator is part of a direct drive motor that electrically drives the outer rotor. If the stator coils become wet or the coated wires on the coils short out, they can produce a burning smell. You can test the stator coils with a meter. If the stator is smoking, or smells burnt, it will need to be replaced.
Enter model number to search for the required part specific to your product
02 - Kelvinator Washing Machine Main Control Board
The main control board provides power to the various components of the washer. If the control board receives a power surge, or a component fails, the control board can short-out causing a burning smell. Inspect the control board for burn marks. A burnt main control board will need to be replaced.
03 - Kelvinator Washing Machine Motor Control Board
The motor control board sends power to the motor. If the motor shorts out or a power surge occurs components on the board can blow out causing a burning smell. Inspect the motor control board for burn marks and replace if necessary.
The control board provides power to the components of the washer. If the control board receives a power surge or a component fails, the control board can short out causing a burning smell. Inspect the control board for burn marks. If the control board is burnt, it will need to be replaced.
The water pump belt can get worn and slip on the pulleys causing a burning smell. Check the motor pulley for wear and make sure the water pump turns freely.
If the drive belt is worn or frayed it can slip on the pulley causing friction and a burning smell. Also check the components the belt is turning to make sure they turn freely. A stuck water pump or idler pulley can create enough friction to cause the belt to burn.