Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeChoose Product
Identify Problem
03
Find Solutions
HomeRepair HelpUS Craftmaster RepairUS Craftmaster Water Heater runs out of hot water Repair
US Craftmaster Water Heater runs out of hot water
01 - US Craftmaster Gas Valve Assembly
The gas valve opens to allow gas to enter the burner. If the gas valve does not open, the burner will not light, and the water heater will not heat. If not corrected, the water heater will eventually run out of hot water. First, ensure that the ignition source is working properly. Second, ensure that the gas valve has pressure. If the ignition source is working, and the gas valve has pressure, consider replacing the gas valve assembly.
Enter model number to search for the required part specific to your product
Highly Likely
02 - US Craftmaster Gas Valve and Thermostat Assembly
The gas valve opens to allow gas to enter the burner. If the gas valve does not open, the burner will not light, and the water heater will not heat. If not corrected, the water heater will eventually run out of hot water. First, ensure that the ignition source is working properly. Second, ensure that the gas valve has pressure. If the ignition source is working, and the gas valve has pressure, consider replacing the gas valve and thermostat.
Highly Likely
03 - Temperature Set Too Low
Getting the water in the tank to the right temperature is often a challenge. While most water heater thermostats or thermostat valves will have a recommended temperature designation, you will need to adjust the setting then wait and see what the actual water temperature is by checking it with a thermometer. Refer to owner's manual for guidance.
Highly Likely
04 - US Craftmaster Dip Tube
The dip tube distribtues the incoming water to the bottom of the tank to ensure that all of the water is heater thoroughly. If the dip tube breaks and becomes detached from the incoming cold water pipe, the incoming water won't be properly heated. A broken dip tube will need to be replaced with a new one.
Common
05 - US Craftmaster Thermostat
The thermostat senses the temperature in the water heater and regulates it accordingly. If the thermostat is defective, it may not sense that the water temperature has dropped and the heating element will not turn on to heat up the water. You can use a multimeter to test each thermostat to determine if the component if functioning normally. A defective thermostat will need to be replaced with a new one.
Common
06 - US Craftmaster Heating Element
Electric waters heaters depend on heating elements to warm the water in the tank. If one or more of the elements is faulty, the water won't be heated properly. To determine if the heating element is defective, use a multimeter test it for continuity. If the heating element does not have continuity, replace it.
Less Common
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com