Modern Maid Range/Stove/Oven Parts

Modern Maid Range and Oven Parts

Modern Maid ranges are budget-friendly vintage appliances that are still cooking in kitchens across the country. When your oven won't heat, your burners won't ignite, or your range has stopped responding, the fix is often simpler and cheaper than you'd expect. Repair Clinic stocks genuine OEM parts for Modern Maid gas and electric ranges — from igniters and heating elements to control boards and door hinges.

The most common Modern Maid range failures are gas oven igniters (won't heat), electric bake/broil elements (no heat), and oven control boards (error codes or no response). Many of these repairs cost $20 to $100 in parts and take under an hour with basic tools. Start by identifying your model number on the back of the range — it's stamped on a label — then search our parts catalog to find your exact replacement.

• Oven won't heat: Gas igniter (most common), oven control board, temperature sensor, thermal fuse (after self-clean cycle)
• Burners won't ignite: Surface burner switches (electric), gas igniter, spark module (electronic ignition)
• Cooktop glass cracked: Main top assembly replacement (if your Modern Maid has a smooth glass cooking surface)
• Door won't stay closed or seal: Door hinges, door springs, door gasket seal
• Range won't power on: Thermal fuse, control board, power cord, main fuse

Modern Maid Range Parts — Frequently Asked Questions

What is the most common Modern Maid range repair?

Gas oven igniters are the #1 Modern Maid range repair. The flat silicon carbide igniter glows to open the gas valve — when it weakens or fails, the oven won't heat even though you hear the valve trying to click. It's a $15 to $40 part and a 20-minute fix. Always verify the igniter type (SiC vs. SiN) for your specific model before ordering.

How do I find my Modern Maid model number?

Your Modern Maid model number is stamped on a white or silver label on the back of the range, usually near the bottom or on the side panel. Write it down exactly as printed — it typically starts with letters followed by numbers (e.g., RG32 or EG44). Enter your full model number into Repair Clinic's parts finder to see all compatible parts for your range.

Can I replace an oven control board myself?

Yes — oven control boards (also called ERCs or clock/timer assemblies) are usually held in by two screws and a clip connector. Unplug the range or kill power at the breaker, remove the old board, disconnect the wiring harness, and plug in the new one. Always order the exact OEM board for your model number; aftermarket boards may not fire the igniter or control temperature correctly.

What's the difference between a bake element and a broil element?

The bake element is the lower heating element inside the oven — it heats most of the time. The broil element is the upper element under the oven roof — it heats only during the broil cycle. Both are common failure points on electric Modern Maid ranges. If your oven won't heat at all, the bake element is first to check; if only broiling fails, test the broil element.

Find the Model Number on Your Modern Maid Range

Modern Maid typically prints the model number on a white or silver label on the back of the range, often near the lower section or along a side panel. If it is not there, check the oven door frame, the front edge of the storage drawer opening, or another accessible cabinet edge. Copy the complete model number exactly, including letters, numbers, and any hyphens. Enter it into the Repair Clinic search bar to narrow the full Modern Maid Range/Stove/Oven catalog to parts made for your unit. Using the model number helps match everything from heating elements and igniters to hinges, controls, seals, and other associated parts, so you can order the correct replacement without sorting through incompatible options.