MTD Small Engine Parts

Primer bulb

Carburetor gasket

Briggs and Strartton in-line fuel filter with 40 micron rating and 1/4" inlet & outlet. If the engine does not start then the fuel filter may be clogged and not allowing enough fuel to enter the carburetor.

Briggs & Stratton Original Equipment 492932S Oil Filter. Length: 2 1/4 inches. For optimum performance, we recommend changing the oil in your small engine after the first five hours of use. After that, change the oil on a yearly basis or after every 50 hours of use (whichever comes first).

Small engine NGK spark plug (BPR6ES). If the engine does not start, the spark plug may be defective. The spark plug should be replaced periodically during regular maintenance.

Lock nut with nylon insert.

Tube-breather

Fuel pump. If this fuel pump is being installed on a Intek V-Twin engine originally equipped with a metal fuel pump, related item 1567967. The fuel pump supplies fuel to the carburetor while the engine is running. If the fuel pump is clogged, the engine may not start or may run rough.

Fuel cap assembly

Tecumseh carburetor bowl gasket. If this gasket is torn or damaged, the engine may run rough. Be sure to clean the surfaces around the carburetor gasket before installing it.

Briggs & Stratton recoil starter kit. The recoil starter engages the drive cup on the flywheel to start the engine. If the recoil starter is defective, the engine may not start.

Briggs & Stratton in-line fuel filter. The filter screen is on the large side of the housing. The port on the large side goes to the fuel tank while the port on the small side of the housing goes to the carburetor.

Carburetor Gasket and air guide

Nylon insert locking nut. Used as part of the shear bolt assembly, as well as other locations within the equipment.

Carburetor gasket