Husqvarna Snowblower Parts

Small engine primer bulb. The primer bulb draws additional fuel into the carburetor to help start the engine.

Husqvarna fuel filter. If the fuel filter is clogged, it will restrict the flow of fuel to the carburetor. As a result, the engine may not start.

Briggs and Strartton in-line fuel filter with 40 micron rating and 1/4" inlet & outlet. If the engine does not start then the fuel filter may be clogged and not allowing enough fuel to enter the carburetor.

Small engine recoil starter assembly. This item includes the pulley and spring. The recoil starter engages the drive cup on the flywheel to start the engine when pulled.

Fuel Line (Small)- 9/64 (.140) inch OD - (.080) inch ID, W/ Installation instructions.

Snowblower shear bolt, locking nut sold separately. This part has been updated by the manufacturer; it no longer requires a spacer. Shear bolts are designed to break in half if the auger strikes a hard object to prevent damage to the transmission and engine by stopping the auger from turning.

Briggs & Stratton snowblower shear bolt kit. 1/4-20 x 1 3/4". Shear bolts are designed to break in half if the auger strikes a hard object to prevent damage to the transmission and engine. If the shear bolt is broken, the auger won’t be able to turn.

Briggs & Stratton flywheel key. The flywheel key aligns the flywheel in the correct position on the crankshaft. If the engine stops suddenly due to hitting a hard object, the flywheel key shears in half to prevent damage to the engine. If the flywheel key is broken, the engine won't start.

Lawn Mower Flange Bushing. Also called a bearing.

Rear skirt

Crankcase oil seal, PTO side

Shave plate

Nut-Locking. The manufacturer has changed vendors and the part may vary in character. Some do not have a nylon insert, however the nut is a locking type.

Wheel drive belt

Husqvarna hex head blade bolt. 3/8-24 x 1 -3/8.