Find the right part faster
Multiple models matched. Select your model to confirm fit.

Tecumseh carburetor bowl gasket. If this gasket is torn or damaged, the engine may run rough. Be sure to clean the surfaces around the carburetor gasket before installing it.

Small engine carburetor bowl gasket.

Carb float bowl gasket set
Toro snowblowers are known for reliable single-stage and two-stage performance, but ethanol-contaminated fuel is the snowblower owner's worst enemy. When your Toro carburetor starts leaking fuel, runs rough, or won't start cleanly, gasket and seal failures are often the culprit. The carburetor bowl gasket, needle seat gasket, and fuel line seals degrade when exposed to ethanol-blended fuel — a $5 to $15 replacement that beats a full carburetor overhaul.
Carburetor gasket kits for Toro snowblowers include the bowl gasket, fuel inlet needle and seat, O-rings, and float bowl seals. These kits solve hard starts, fuel leaks, and rough running without replacing the entire carburetor body. For best results, drain old fuel, soak the carburetor in cleaner, install fresh gaskets, and use ethanol-free fuel.
Use your Toro snowblower model number to confirm the correct carburetor type and gasket kit. Toro snowblower gasket and seal parts are in stock and ready to ship — get your machine running clean before the next storm.
Ethanol-blended fuel is the primary culprit. Ethanol absorbs moisture and turns to varnish when the snowblower sits idle during spring and summer. This varnish clogs fuel passages and degrades rubber gaskets and O-rings. When you fire up your Toro in November, the carburetor leaks fuel, won't fill properly, or floods the cylinder. A gasket and seal kit solves this — drain the old fuel, clean the carburetor bowl, install fresh gaskets, and use ethanol-free fuel next season.
Look for fuel dripping from the bottom of the carburetor, especially when the machine sits overnight. Check the spark plug for wet black carbon or raw fuel smell — that means fuel is leaking past the needle seat into the cylinder. Hard starting after sitting, rough running, or the engine dying under load are also signs of a failing gasket or seal. If you see fuel pooling in the carburetor bowl when you remove the air cleaner, the bowl gasket has failed.
Start with a gasket and seal kit — it's the least expensive fix and solves 80% of carburetor problems on idle snowblowers. Clean the carburetor body with carburetor cleaner, install the new gaskets and O-rings, and reassemble. If the carburetor still leaks or runs poorly after fresh gaskets, the main jets or needle seat may be damaged, and a full carburetor replacement is the next step. But for most off-season storage issues, gasket kits work.
Enter your full Toro model number (found on the frame or engine block) into the Repair Clinic search tool. The lookup will show your exact carburetor type and gasket kit — some Toro 2-stage units use different carburetors than single-stage Power Clear models, so the gasket shape and part count vary. Having the right kit ensures you don't order a diaphragm gasket for a float-type carburetor or vice versa.


Maintain your Toro snowblower's efficiency by ordering genuine carburetor bowl gasket replacements online from Repair Clinic. Quickly find compatible parts using our model or part number lookup, ensuring a precise fit for proper function. With 365-day returns and a Price Match Guarantee, you can order with confidence. Plus, benefit from our same-day shipping if you order by 9:00 PM ET. Expand your repair toolkit with our selection of Toro Snowblower Parts or Toro Snowblower Parts. For installation guidance, visit our Snowblower Repair Help section.
On Toro snowblowers, look for the model number label on the frame behind the engine, beneath the handle panel, or on the auger housing. Clean off packed dirt or snow so you can read the complete number and any serial information. Type it into our model number lookup and the catalog narrows to parts made for your unit. Using the full Toro model number filters the complete snowblower parts selection, not just carburetor parts, so you can match gaskets, belts, controls, and other associated parts correctly. It is the quickest way to be sure the part fits before you order.

Repair Clinic's online repair library helps Toro Snowblower owners and technicians work through the diagnosis and installation. Troubleshooting videos, symptom articles, and part testing walkthroughs help you determine which component has failed. Once you know what to replace, use the model number lookup to confirm the exact OEM part, then follow the matching installation video from start to finish.

The eight most common reasons your snowblower is leaking gas and how to fix them. From worn carburetor gaskets to cracked fuel lines, this guide identifies potential issues and repair solutions to keep your snowblower running smoothly.

How to clean your snowblower carburetor to restore engine performance and fix starting issues. This guide covers symptoms of a dirty carburetor and step-by-step cleaning instructions.

Learn the top five reasons your snowblower's auger won't turn and how to fix it. From worn belts to broken shear pins, this guide covers common causes and repair solutions.