Montgomery Wards Tiller Parts

Montgomery Ward Tiller Parts

Montgomery Ward tillers built decades ago are still turning soil in gardens across the country. Whether your Ward front-tine or rear-tine tiller won't start, the tines won't engage, or you need seasonal maintenance parts, Repair Clinic stocks the OEM parts you need. We've got carburetors, drive belts, tine assemblies, spark plugs, and hard-to-find control cables — the same parts Ward used at the factory.

Enter your tiller model number above to find the exact replacement parts for your machine. If you need help locating your model number, check the metal tag on the tiller frame or the engine block.

• Carburetors & fuel system: Hard start, runs rough, or won't start after sitting
• Drive belts & tine belts: Tines won't engage or spin during operation
• Tine sets & tine assemblies: Bent, worn, or missing tines; front and rear configurations
• Spark plugs & ignition: Maintenance and seasonal replacement
• Control cables & throttle: Snapped or stuck engagement cables
• Shear pins & transmission parts: Tine jam protection and drive parts

Montgomery Ward Tiller Parts FAQ

Where do I find my Montgomery Ward tiller model number?

Check the metal nameplate or data tag bolted or riveted to the frame of the tiller — usually located on the side or underneath the hopper. You may also find it on the engine block itself if the tiller is older. The model number format is typically numeric or alphanumeric (e.g., "4802" or "WD-48"). Once you have it, enter it in the search box above to see all compatible parts for your exact tiller.

What's the most common reason my Montgomery Ward tiller won't start?

The carburetor is the #1 culprit, especially if your tiller has sat unused for a season or more. Ethanol in modern gasoline gums up the carburetor jets and float needle, preventing fuel flow. A carburetor rebuild kit (jets, needle, gasket, float bowl) is often enough to restore function. If the tiller has been stored improperly or with stale fuel, draining the tank and soaking the carb for a few hours can work wonders. Spark plug fouling is the second most common issue — a fresh spark plug may be all you need.

Why won't my tiller's tines engage or turn?

The drive belt or tine belt has likely snapped or slipped off the pulley. Older Ward tillers use flat or V-belt systems that wear out over time. Check the belt routing first — if it's off the pulley, you may be able to slide it back on. If the belt is cracked, frayed, or missing entirely, a replacement belt assembly is your answer. Shear pins (or bolts) are designed to break if the tines jam on a rock or root, so inspect those too. Always carry spare shear pins when using your tiller.

Can I get parts for an older Montgomery Ward tiller from the 1970s or 1980s?

Yes — Repair Clinic carries both common and hard-to-find Montgomery Ward tiller parts across decades of production. Many Ward tillers used Briggs & Stratton or Tecumseh engines, and small-engine parts are widely available by engine model number (stamped on the engine block). For frame-specific parts like cables, belts, and tine assemblies, your Montgomery Ward model number is essential. Use the model lookup tool above — if we stock it, you'll see it; if we don't, we can often source it through our OEM network.

Order Montgomery Wards Tiller Parts Online

Ordering Montgomery Wards tiller parts online is simple and helps you find genuine OEM parts for your unit. With same-day shipping on most in-stock items, you'll have your replacement part fast, minimizing downtime. Our model/part number lookup finds the exact OEM part for your unit, and every order is backed by our 365-day return policy and price-match guarantee. Browse our repair help section for troubleshooting tips, part testing guides, and step-by-step installation videos for your specific product.

Montgomery Wards Tiller Model Number: Where to Look

On Montgomery Wards tillers, check the frame near the engine and around the handle assembly for a model number tag or stamped identification plate. Clear away dirt and look for a code that may begin with "TMO," such as TMO-3902903. Enter that complete number in the model number search bar to narrow the catalog to parts made for your entire tiller, including the engine, drive system, controls, and other associated parts. If the label is worn, use the clearest characters you can read and compare the result with your equipment. Matching the model first saves time and helps prevent ordering parts that do not fit.