MTD Tiller Parts

Fuel cap assembly

Lock nut with nylon insert.

Carriage Bolt: 5/16-18 x .750"

Carburetor for 2-cycle engine. If the carburetor is clogged, the engine won't get enough fuel. As a result, the engine may not start or may run rough.

Nylon insert locking nut. Used as part of the shear bolt assembly, as well as other locations within the equipment.

Replacement clutch kit

Tecumseh fuel line clamp.

Briggs & Stratton in-line fuel filter. The filter screen is on the large side of the housing. The port on the large side goes to the fuel tank while the port on the small side of the housing goes to the carburetor.

MTD flange lock nut, 5/16-18.

Two cycle engine carburetor. If the engine runs rough, the carburetor may be restricted. The carburetor can often be cleaned or rebuilt, but sometimes it may need to be replaced.

Carburetor gasket. If this gasket is torn or damaged, the engine may run rough. Be sure to clean the surfaces around the carburetor gasket before installing it.

Honda insulator gasket.

Briggs & Stratton flywheel key. The flywheel key aligns the flywheel in the correct position on the crankshaft. If the engine stops suddenly due to hitting a hard object, the flywheel key shears in half to prevent damage to the engine. If the flywheel key is broken, the engine won't start.

Cable, front drive. 30.5 inches

Tecumseh carburetor outlet gasket.