Crosley Dryer Parts

Dryer drum drive belt, 5 rib

Idler pulley wheel and bearing. If the idler pulley wheel and/or bearing is defective, it may cause the dryer to be excessively noisy.

Dryer rear drum bearing kit. The holes in the metal plate are not threaded. Use the self tapping screws in the kit to thread the plate. If the dryer is noisy then the rear bearing could be worn and require replacement.

Gas dryer sensor for igniter and flame. The sensor is located across from the gas igniter at the dryer’s burner assembly. This flame sensor should be closed for continuity at room temperature. Check for continuity with a multi-meter before replacing.

Motor pulley, 60 hertz

This is a genuine replacement part. Whirlpool 349639 Lint Screen.

Dryer tri-ring retainer for drum support rollers.

Light Bulb 10 Watt small base

Dryer timer assembly

Thermal cut out fuse and high limit thermostat kit

White silicone adhesive caulk. Forms a heat resistant bond. Often used for gaskets, seals and burner grate feet.

Outer grille

Universal appliance light bulb, 40A15. 40 WATT 15 AMP standard base

Heating element thermal cut-off (thermal fuse) 360 degrees and high-limit thermostat 250 degrees. The thermal fuse is a safety device designed to protect the dryer from overheating. A multimeter can be used to test the fuse. Always check the dryer venting when replacing a blown thermal fuse.

Timer knob, white