Crosley Dryer Parts

Drum baffle, tall

Shaft for dryer drum support roller. Front shaft with right hand threads. Part is updated so nuts may need to be replaced as well on older dryers.

Dryer thermal limiter (or thermal fuse). May be located on the blower housing or element. If the dryer overheats, the thermal fuse blows to cut off power to the dryer. If the thermal fuse has blown, the dryer won't start. The thermal fuse cannot be reset--if the fuse has blown, it must be replaced

Shaft for drum support roller, left side

Appliance light bulbs (2 pack).

-40 Watts
*No longer Frosted

Dryer high-limit thermostat, L260-70F. If the dryer overheats, this high-limit thermostat will cut off the power to the heating element. If the high-limit thermostat has blown, the dryer won't heat.

Thermal Fuse & High Limit thermostat kit, heater duct

Door Catch

Screw, 10-24 3/8

Idler pulley for dryer drum drive belt

Dryer heating element and housing assembly. If the dryer does not heat check for a blown themal fuse or thermal cut out. Heating elements will often have a break in the coil element if defective.

Idler pulley wheel and bearing assembly. The idler pulley puts tension on the drive belt. If the idler pulley fails to put the proper amount of tension on the belt, the dryer will not spin.

Thermal Fuse (Non Resetable)

Cycling thermostat, with internal-bias heater L155-25F

Dryer door seal. 61.42 inches.