Amana Dishwasher Parts

Amana Dishwasher Parts That Keep Your Wash Cycles Running

Amana dishwashers are built by Whirlpool, which means they're designed for reliability and straightforward repair. When your Amana stops filling, won't drain, or refuses to start, the fix is usually a single OEM part. We carry every common replacement — from door latches to circulation pumps — and they're all tested to match your exact model number.

Most Amana dishwasher repairs happen fast. A door latch assembly that won't engage is the #1 culprit stopping cycles before they start. Water inlet valves fail next, followed by drain pumps that leave standing water. If you know your model number, you're 30 seconds away from the right part.

• Door latch assembly won't click: Latch has a built-in switch — if it doesn't fully engage, the control board sees the door as open and locks you out.
• Dishwasher fills then drains immediately: Water inlet valve stuck open, or float switch tripped. Both are quick OEM swaps.
• Standing water after cycle: Drain pump failure — you'll hear the motor hum but no water moves. Circulation pump can fail the same way.
• No spray action, poor cleaning: Spray arms clogged or cracked, or circulation pump isn't moving water. Dishrack wheel clips are also a common culprit.
• Control panel dead or unresponsive: Control board failure. Enter your model number to confirm the exact board for your Amana.

Find your Amana dishwasher model number on a sticker inside the door edge or on the side wall. Enter it into our parts finder to see every compatible replacement.

Amana Dishwasher Parts: Answers to Your Top Questions

Why won't my Amana dishwasher start?

The door latch assembly is the first place to check. It contains a safety switch that tells the control board the door is closed — if the latch doesn't fully seat or the switch has failed, the dishwasher won't run. You'll hear nothing when you press start. The latch is a quick OEM replacement and costs $30 to $60. If the latch clicks and engages fully, the problem is the control board, which is more expensive but still a straightforward swap once you have your exact model number.

How do I find my Amana dishwasher model number?

Open the dishwasher door and look at the top edge of the inner door frame, or check the left side wall inside the tub. You'll see a white or silver label with the model number starting with digits like 665, 667, or 669. Write down the full number — it tells us exactly which door latch, control board, and inlet valve you need. Model numbers matter because Amana made different versions over the years, and using the wrong part wastes time and money.

What's the difference between a water inlet valve and a circulation pump?

The water inlet valve fills the dishwasher at the start of the cycle — if it fails, the tub stays dry and nothing washes. The circulation pump moves that water through the spray arms during the wash phase — if it fails, water fills the tub but never sprays, so dishes don't get clean. Both are common Amana failures. If your tub fills but stays silent during the wash cycle, the circulation pump is your answer. If it won't fill at all, check the inlet valve.

Why is my Amana leaving standing water?

The drain pump is almost always the reason. You'll hear the motor trying to run but water doesn't move. It's located under the tub and is a 20-minute job with the right OEM pump assembly. Before you replace it, check that the drain hose isn't kinked or clogged — a blocked drain looks identical to a failed pump. If water drains fine on every other cycle, the float switch may have stuck, triggering a safety shutoff. Float switches are inexpensive and solve that problem fast.

Order Amana Dishwasher Parts Online

Ordering Amana dishwasher parts online is simple and helps you find genuine OEM parts for your unit. With same-day shipping on most in-stock items, you'll have your replacement part fast, minimizing downtime. Our model/part number lookup finds the exact OEM part for your unit, and every order is backed by our 365-day return policy and price-match guarantee. Browse our repair help section for troubleshooting tips, part testing guides, and step-by-step installation videos for your specific product.

Amana Dishwasher Model Number: Where to Look

On Amana dishwashers, look for the model number on the top edge of the inner door frame or along the side wall inside the tub. Open the door fully and check the white or silver identification label for the complete model number, including any final letters or digits. Enter that number in the search bar to narrow the catalog to replacement parts that fit your entire Amana dishwasher, from pumps and latches to racks and wiring. The model number is the key to filtering the full parts selection for your exact unit, so you can avoid matching parts by appearance alone. This gives you a fast, accurate match and fewer wrong orders.