Estate Parts

Dishwasher drain pump. If the dishwasher does not drain then the drain hose could be clogged or the drain pump damaged or defective.

This is a genuine replacement part. Whirlpool 349639 Lint Screen.

Dryer tri-ring retainer for drum support rollers.

Light Bulb 10 Watt small base

Dishwasher water inlet valve.
New design no longer includes or requires the mounting bracket. Valve mounts directly on the frame.
If the dishwasher won't fill properly, then the water valve is likely restricted and will need replacement.

EveryDrop Ice & Water Refrigerator Filter 5 reduces 16 contaminants, including lead and mercury, asbestos, and industrial chemicals. Each filter provides 240 gallons of filtered water and should be changed every 6 months to ensure proper contaminant removal and flow rate. NSF certified.

Washing machine tub counterbalance spring. This spring offsets the weight of the motor on the front of the washer. If broke, the tub will lean forward and the tub will be off balance during the spin cycle.

Refrigerator meat drawer with molded handle and clear body.

Dishwasher door gasket kit. Includes new strike for door latch. Look for tears, gaps or cuts in the gasket that could cause a dishwasher door leak.

Agitator Bolt

White silicone adhesive caulk. Forms a heat resistant bond. Often used for gaskets, seals and burner grate feet.

Surface coil element replacement kit, 2 eight inch elements, 2 six inch elements, four receptacles and related hardware. If the terminal blocks and surface elements on your stove top are in bad shape this is the perfect kit to refresh the appliance.

Universal appliance light bulb, 40A15. 40 WATT 15 AMP standard base

The Whirlpool Bake Element is a high quality part located at the bottom of the oven that supplies heat for baking. It is 16-5/8 inches wide X 15-3/4 inches deep and is for electric ovens on ranges with a rating of 2600Watt and 240Volt. It replaces multiple part numbers. Use caution when servicing.

Heating element thermal cut-off (thermal fuse) 360 degrees and high-limit thermostat 250 degrees. The thermal fuse is a safety device designed to protect the dryer from overheating. A multimeter can be used to test the fuse. Always check the dryer venting when replacing a blown thermal fuse.