Crosley Heating Element Parts

Dryer electric heating element assembly

Dryer heating element assembly. If the dryer does not heat the thermal fuse should be checked before replacing the heating element. Normally, the element will have a break in the coil if defective.

The Frigidaire Bake Element is a high quality replacement part for electric ovens on ranges. It is located at the bottom of the oven and supplies heat for baking. It replaces several part numbers

Dishwasher heating element kit. If the dishwasher isn't drying the dishes properly, the heating element may have burned out

8 Inch electric coil surface element with looped terminals, 2600 watts. 5 turns

Dishwasher heating element

Dual radiant surface element, 9 inches/6 inches, 3000 watts

8 Inch electric coil surface element with looped terminals, 4 turns

6-inch electric coil surface element with looped terminals, 1250 watt, 4 turn, black center cap

Defrost heating element

Range/stove surface element (6-inch). If the surface element won't heat, either the surface element or the surface element switch may be defective. To determine if the surface element is defective, use a multimeter to test it for continuity.

Oven bake element with push-on terminal ends. It is not unusual for a bake element to short out and arc in one spot. If this occurs, disconnect the power to the stove until the element has been replaced.

Surface coil element replacement kit, 2 eight inch elements, 2 six inch elements, four receptacles and related hardware. If the terminal blocks and surface elements on your stove top are in bad shape this is the perfect kit to refresh the appliance.

This Frigidaire heating element assembly is a genuine replacement part for dryers, ensuring smooth operation and perfectly dry clothes. Compatible with various models.

Oven bake element. The terminals are male quarter inch spade connectors. The wires push onto the heating elements connectors. If the oven does not bake then the element could have burned out.