Amana Sensor & Thermistor Parts

Dryer thermistor. This thermistor should read approximately 11.9K Ohms of resistance at 70 degrees Fahrenheit (21’ Celsius). If the thermistor is defective, it may prolong or shorten the drying time or cause a fault code. A defective thermistor is not responsible for a dryer not heating.

Dryness sensor bar

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Oven temperature sensor. The oven sensor works in conjunction with the oven control board to regulate the oven temperature

Gas dryer sensor for igniter and flame. The sensor is located across from the gas igniter at the dryer’s burner assembly. This flame sensor should be closed for continuity at room temperature. Check for continuity with a multi-meter before replacing.

Oven temperature sensor

Refrigerator/ freezer thermistor kit This kit no longer comes with instructions, Take the part number for the Kit and enter it at Servicematters.com for a copy of the instructions.

Oven temperature sensor kit, 6 inches long. The sensor includes two wire harness adapters for a variety of applications and installation instructions.

Temperature sensing thermistor

Turbidity (soil) sensor mounted in pump sump under dishwasher

Oven sensor kit, short 3" long

Temperature sensor at evaporator in the freezer

Air conditioner thermistor. The thermistor is a sensor connected to the control board that detects the temperature of the air. The ohm reading should be around 30k at a 75 degree room temperature.

Thermistor Kit

Wash sensor used to detect water clarity