MTD Parts

Fuel Tank Kit

Lower handle bar. There are two sets of holes in the bar. The one closest to the flat end is used for shipping. You will use the mounting hole furthest away for normal use.

Genuine MTD 742-0305A-0637 Articulating Roto-Tiller Tine

Handle-lower po7

Briggs & Stratton Spark Plug (RJ19LM). If the engine does not start or runs poorly then the spark plug may be defective and will need replacement.

Lawn mower trail shield (or rear skirt).

MTD Spark Plug. The spark plug ignites the fuel and air mixture in the cylinder to power the engine. If the spark plug is burnt, fouled or damaged the engine may not start or may run rough.

MTD snowblower shear bolt. If the snowblower's auger hits a hard object, the shear bolt breaks in half to prevent damage to the transmission and engine. If the shear bolt is broken, the auger won’t turn. Does not include nuts, see related item.

Tecumseh ignition coil (also called a lamination). The ignition coil sends voltage to the spark plug while the engine is running. If the ignition coil is defective, the engine may not start.

Snow blower V- belt

Briggs and Strartton in-line fuel filter with 40 micron rating and 1/4" inlet & outlet. If the engine does not start then the fuel filter may be clogged and not allowing enough fuel to enter the carburetor.

Primer bulb

Small engine recoil starter assembly. This item includes the pulley and spring. The recoil starter engages the drive cup on the flywheel to start the engine when pulled.

Shave Plate 24"

Cable-speed selector