Tecumseh Parts

Primer repair kit

Tecumseh carburetor bowl gasket. If this gasket is torn or damaged, the engine may run rough. Be sure to clean the surfaces around the carburetor gasket before installing it.

Briggs & Stratton recoil starter kit. The recoil starter engages the drive cup on the flywheel to start the engine. If the recoil starter is defective, the engine may not start.

Carriage Bolt: 5/16-18 x .750"

Briggs & Stratton in-line fuel filter. The filter screen is on the large side of the housing. The port on the large side goes to the fuel tank while the port on the small side of the housing goes to the carburetor.

Nylon insert locking nut. Used as part of the shear bolt assembly, as well as other locations within the equipment.

Carburetor gasket

Briggs & Stratton starter gear (also called a pinion gear), 16-tooth, plastic. The starter gear engages the flyhweel to start the engine. If the teeth on the starter gear are worn out, the engine may not start.

Tecumseh fuel line clamp.

Replacement Briggs & Stratton fuel line kit with clamps. 1/4 Inch inside diameter, Cut to length.

Briggs & Stratton exhaust push rod, steel.

Tecumseh carburetor outlet gasket.

Tecumseh ULTRA-FRESH powdered fuel stabilizer. Treats up to 2.5 gallons of gasoline.

Fuel cap

Champion spark plug (RCJ6Y). The spark plug ignites the fuel and air mixture in the engine's cylinder to power the engine. If the spark plug is has fouled (if the tip of the spark plug is burnt or damaged), the engine may not start or may run rough.