Fasco Parts

Fasco Replacement Motors for HVAC and Appliances

Fasco is a leading OEM motor manufacturer whose motors power furnace inducers, blower assemblies, evaporator fans, and condenser units across dozens of appliance and HVAC brands. When your furnace won't blow air, your refrigerator runs warm, or your air conditioner's outdoor fan has quit, a Fasco motor replacement is often the exact fix you need — if you match the model number on the original motor.

Fasco motors are engineered to precise specifications: horsepower, rotation direction, mounting flange type, and voltage all matter. Use the model number stamped on your failed motor to find the exact OEM replacement. Don't guess on amps or frame size — an incorrect motor won't fit, won't start, or will burn out prematurely.

• Furnace inducer motors: Draft induction, airflow pressure monitoring; common on Lennox, York, Trane, Carrier
• Blower motors: Air handler and furnace blower assemblies; 1/3 to 1 HP range; sealed bearing and sleeve bearing types
• Refrigerator evaporator fan motors: Circulation fans for fridge/freezer air distribution; 115V or 230V
• Condenser fan motors: Outdoor AC and heat pump condenser units; critical for cooling efficiency
• Air conditioner indoor blower motors: Window and split-system cooling units; capacitor-start and permanent-split-capacitor types

Fasco Motor Questions & Answers

What model number do I need to look up a Fasco replacement motor?

The model number is printed directly on the motor housing — usually a metal label on the side or back. It will look like "D707" or "A602" followed by additional characters. This model number ensures you get the exact replacement with the correct horsepower, voltage, rotation, and mounting configuration. If the label is worn, use your appliance or HVAC unit's model number and we can cross-reference the motor type for you.

Can I use a Fasco motor from a different brand in my furnace or air conditioner?

Yes — Fasco motors are OEM-built for Lennox, York, Nordyne, Trane, and many other brands. However, the motor must have the same specifications: HP rating, voltage, rotation direction (CW/CCW), mounting flange, and bearing type. Always verify using the model number on your failed motor or your HVAC unit's model number. A slight mismatch in frame size or rotation will prevent the blower or inducer from working.

What's the difference between sealed bearing and sleeve bearing Fasco motors?

Sealed bearing motors have ball bearings that require no lubrication — they last longer and are preferred for furnace and indoor air handler applications. Sleeve bearing motors use oil-lubricated bushings — they're less expensive but require periodic oiling and are typically found in older or budget equipment. Check your original motor's bearing type and match it on replacement — don't swap one for the other.

My furnace inducer motor is humming but won't turn — is it the Fasco motor?

A humming motor that won't spin usually means the motor itself is OK, but the load is stuck or the capacitor is bad. Before replacing the motor, check that the blower wheel or inducer wheel spins freely by hand (power off). If it turns freely but the motor still won't run, the capacitor or the motor's internal bearings are the likely culprits. Use your motor's model number to find the correct Fasco replacement, and pair it with a new capacitor if needed.

Locating the Model Number on Your Fasco Motor

Fasco prints the model number on most motors, usually on a metal label attached to the side or back of the motor housing. Look for a code such as D707 or A602, along with any letters or numbers that follow it. If the label is difficult to read, check the appliance or HVAC unit's data plate for its model number instead. Enter the number in our model number lookup, and the catalog will narrow to Fasco parts made for your specific motor or unit across all applicable categories. You'll spend less time comparing horsepower, voltage, rotation, and mounting details, making it easier to order the right replacement with confidence.