US Craftmaster Parts

US Craftmaster Water Heater Parts

US Craftmaster is an AO Smith subsidiary, built by the same manufacturer and engineered to the same standards as AO Smith water heaters. Whether you're dealing with a gas, electric, or tankless model, finding the exact OEM replacement parts keeps your water heater running reliably — and keeps repair costs low compared to replacement.

The most common repairs on US Craftmaster water heaters come down to a handful of parts: thermocouples that let the pilot light die, heating elements that fail on electric models, dip tubes that break and mix cold water into your hot supply, and anode rods that corrode over time. All are straightforward fixes when you have the right OEM part for your model.

• Thermocouple (gas models): Pilot light won't stay lit — the safety sensor has failed and shut off gas flow
• Heating element (electric models): No hot water or insufficient hot water — upper and lower elements fail independently
• Dip tube: Hot water that runs out fast or loses temperature — the tube feeding cold water to the tank bottom has broken
• Anode rod: Corrosion prevention rod; corroded rods leave the tank vulnerable; replace every 3 to 5 years
• Pressure relief valve: Leaking from the valve, or over 6 years old — replace for safety

Enter your US Craftmaster model number above to find the exact parts your water heater needs.

US Craftmaster Water Heater Parts: Common Questions

Why is my US Craftmaster gas water heater pilot light going out?

The thermocouple is almost always the culprit. It's a $10 to $20 safety sensor that proves the pilot flame is burning — when it weakens or fails, the gas valve shuts off immediately as a safety measure. It's the most common gas water heater repair and one of the easiest fixes. Just turn off the gas, unscrew the old thermocouple, and screw in the OEM replacement.

My electric US Craftmaster water heater has no hot water — what do I check first?

The heating elements are your first stop. Electric water heaters have an upper and lower element; either one can fail independently. If you're getting some hot water but it runs out fast, the lower element has likely failed. No hot water at all usually points to the upper element. Both are inexpensive ($20 to $50 each) and simple to replace if you're comfortable with basic plumbing and electrical work.

How do I know if my dip tube is broken?

A broken dip tube mixes cold incoming water directly into the hot water at the top of the tank. You'll notice hot water that lasts only a few minutes before turning lukewarm, even though the tank is fully heated. It's a $5 to $15 part and a straightforward replacement that restores full hot water capacity. US Craftmaster and AO Smith dip tubes are often interchangeable — confirm with your model number.

When should I replace the anode rod on my US Craftmaster water heater?

The anode rod is a sacrificial piece of metal designed to corrode instead of your tank. Check it every 1 to 2 years; when it's thin or mostly gone, replace it. On average, plan to replace the anode rod every 3 to 5 years, depending on water hardness and usage. A new anode rod costs $20 to $40 and adds years to your tank's life.

Order Brand-Level Us Craftmaster Replacement Parts Online

Ordering brand-level us craftmaster parts online is simple and gives you access to OEM options across every major brand. With same-day shipping on most in-stock items, you'll have your replacement part fast, minimizing downtime. Our model/part number lookup finds the exact OEM part for your unit, and every order is backed by our 365-day return policy and price-match guarantee. Browse our repair help section for troubleshooting tips, part testing guides, and step-by-step installation videos for your specific product.

US Craftmaster Water Heater Model Number: Where to Look

On US Craftmaster water heaters, the model number is typically printed on the rating plate attached to the side of the tank, often near the gas control valve or upper access panel. Look for a label that also lists the serial number, fuel type, and capacity. Copy the complete model number carefully, including letters and numbers, then type it into the model number search to pull up the parts matched to your unit. The model number filters the full US Craftmaster water heater parts catalog, not just one part, so you can identify compatible parts across the entire repair. That means fewer wrong orders and a faster repair.