Fasco HVAC Parts

Type: Shaded Pole; Diameter: 3.3"; HP: 1/15; Volts: 115; RPM: 3200; Speeds: 1; Amps: 2.25; Rotation: Clockwise; Bearings: BALL

Type: Shaded Pole; Diameter: 3.3"; HP: 1/20; Volts: 115; RPM: 3000; Speeds: 1; Amps: 2.6; Rotation: Clockwise; Bearings: BALL. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Blower Motor Type: Shaded Pole; HP: 1/5 - 1/6 - 1/7; Volts: 115; RPM: 1050; Speeds: 3; Amps: 6.7-5.3-4.7; Enclosure: Open Vent.; Rotation: Clockwise; Bearings: Sleeve; Shaft: 1/2 X 4 1/8"; "A" Dimension (inches): 3 7/8"

Type: Shaded Pole; Diameter: 3.3"; HP: 1/20; Volts: 115; RPM: 3300; Speeds: 1; Amps: 1.8; Rotation: Counter Clockwise; Bearings: BALL

Draft inducer motor kit
Type: Permanent Split Capacitor; Diameter: 3.3"; HP: 1/25; Volts: 115; RPM: 3450; Speeds: 1; Amps: 0.7; Rotation: Counter Clockwise; Bearings: BALL

Motor mounting bracket kit

Furnace draft inducer motor. This shaded-pole motor has the following specifications:

Horsepower: 1/30
Voltage: 115
Full-Load Amperage: 1.35
RPM: 3000
Speeds: 1
Rotation: Counterclockwise
Bearing Type: Sleeve
Shaft Length: 2.5”

Type: Shaded Pole; Diameter: 3.3"; HP: 1/25; Volts: 115; RPM: 3400; Speeds: 1; Amps: 2.3; Rotation: Counter Clockwise; Bearings: BALL

Type: Shaded Pole; Diameter: 3.3"; HP: 1/25; Volts: 115; RPM: 3060; Speeds: 1; Amps: 1.5; Rotation: Clockwise; Bearings: Sleeve

Type: Permanent Split Capacitor; Diameter: 3.3"; HP: 1/18; Volts: 115; RPM: 3450; Speeds: 1; Amps: 0.8; Rotation: Counter Clockwise; Bearings: BALL

Furnace draft inducer motor. This shaded-pole motor has the following specifications:

Horsepower: 1/50
Voltage: 115
Full-Load Amperage: 0.95
Hertz: 60
RPM: 3000
Speeds: 1
Rotation: Clockwise
Diameter: 3.3”

Type: PSC; HP: 1/3 - 1/4 - 1/5; Volts: 115; RPM: 1075; Speed: 3; Amps: 5.9-4.6-3.8; Enclosure: Open Vent.; Rotation: REV; Bearing Style: SLV; Shaft Dimension: 1/2 X 6; Motor Length: 4 1/4

Type: 3 PHASE; Diameter: 3.3"; HP: 1/70; Volts: 33-110; RPM: 1500-4700; Speeds: VAR.; Amps: 1; Rotation: Clockwise; Bearings: BALL

Type: Shaded Pole; Diameter: 3.3"; HP: 1/50; Volts: 115; RPM: 3400; Speeds: 1; Amps: 1.4; Rotation: Clockwise; Bearings: Sleeve

Type: Permanent Split Capacitor; Diameter: 3.3"; HP: 1/20; Volts: 115; RPM: 3450; Speeds: 1; Amps: 0.75; Rotation: Clockwise; Bearings: Sleeve The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.