LG Washing Machine WM2650RD Parts

The 4681EA2001T Washing Machine Drain Pump and Motor Assembly is a genuine OEM replacement part that expels water from your washing machine or washer/dryer combo. This high-quality component ensures proper drainage. It's compatible with Kenmore, LG, and Kenmore Elite models.

Washer cold water inlet valve assembly. Three solenoids. Hot water valve is a separate single coil valve and can be found in related parts

Shock absorber

Washer hot water inlet valve. Standard hose fitting inlet, 1 water outlet. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all.

Washing machine door boot gasket with drain port. If the door boot is torn, the washer will leak water. The most common cause of a torn door boot is if the washer is overloaded. Be aware that your model may also list a door boot without drain port. Be sure to check the original part before ordering.

Washer door lock latch assembly. The door lock secures the washer door shut during operation. Once the washing machine door is closed, the washer can begin operating. If the door lock is defective, the washer door will not latch properly.

Rear tub bearing. This part is very difficult to install. The manufacturer recommends replacing the complete rear tub and bearing assembly.

Inlet hose

Washing machine tub seal between outer & inner tubs

Washer tub bearing, rear. This part is very difficult to install. The manufacturer recommends replacing the complete rear tub and bearing assembly.

Float assembly

Shock Retaining Pin

Washing machine stator assembly with sensor

Washing machine drain hose with bellows. This drain hose makes a connection from the washer tub to the drain pump.

Suspension spring