Shop replacement repair parts for Admiral Dryer model 4GAED4900YW0


Dryer drum drive belt. This belt is approximately 1/4" wide x 92-1/4" long. It is flat on one side and has 4 ribs and 3 grooves on the other. It replaces many other belts, including some with 5 ribs and 4 grooves. The belt attaches to the motor pulley and spins the drum as the motor rotates

The Dryer Repair & Maintenance Kit 4392065 includes rollers, a belt, and an idler pulley. It is specifically designed for 29 wide dryers built in 1965 or later. This kit addresses common issues that cause Whirlpool, Kenmore, Maytag, and KitchenAid dryers to become noisy.

Dryer door switch assembly. If the dryer does not start then the door switch could be defective. This switch also replaces the two wire switch.

Dryer lint screen assembly. Proper air flow is critical to dryer operation so the filter should be cleaned before every load.

Idler pulley for dryer drum drive belt

Dryer door catch kit

Dryer heating element wire connector kit. Wire with spade terminal & wire nut

Door Catch

Screw, 10-24 x 1/2

Spring clip inside control knob

Dryer front panel retainer clip. 1 clip per pack.

Door seal

Screw, 10-24 3/8

Cleaning brush for refrigerators, freezers, dryers and more. This brush is perfect for cleaning condenser coils on refrigeration systems. It is important to regularly clean the condenser coil to ensure the refrigerator is running efficiently.

Front panel felt seal. No glue required, the seal stretches to fit. Note that seal no longer comes with the plastic retainers, reuse the old retainers.