Shop replacement repair parts for Admiral Washing Machine model 4GATW4900YW0


Drive Clutch (Splutch) Kit. This kit has 6 parts; a spring, housing, cam ring, basket drive gear, pulley, and nut. The pulley is driven by the belt and the splutch works with the mode shift actuator to drive the washplate and spin the inner basket. A worn splutch can cause spin or washplate problems

Agitator Dogs - High-quality replacement part from Whirlpool. This kit can be used if the top part of the agitator is not moving properly but the bottom part is.

Washer main drive belt. This belt is located under the washing machine and is used to drive the splutch pulley. It goes around the motor & splutch pulleys. Worn or broken drive belt can cause spin or washplate problems.

Washing machine tub suspension rod kit,. Set of 4 rods, 4 suspension balls and 4 bushings. The suspension rods help to dampen the movement of the washer tub. If one or more of the suspension rods are broken, the washer will vibrate or shake.

Affresh® Washing machine cleaner. This cleaner removes and prevents odor-causing residue in all brands of washers. To use, add one tablet to washer with no clothes and select hot water.
- Septic safe
- More effective than bleach.
- Three tablets per package.

Washing machine drain hose kit. Includes clamp. 4 feet long

Drive block under inner tub

Agitator inner cap and seal. Helps keep water, fabric softener from going thru the agitator. Fabric softner dispenses from the holes in the agitator, just above the cap.

Transmission assembly with shaft, seal & bearing

Spanner Nut

Washplate screw

Drain pump outlet hose

Package of two 5-foot-long Industrial Braid hoses with pre-installed washers and straight ends. It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.

White washer lid strike assembly. The strike is what the lid lock hooks onto to lock the washing machine lid. If the washing machine is not advancing into the cycle or is displaying a lid lock fault this may be the cause of the issue.

Screw, 6-32x.340 flat