Shop replacement repair parts for Poulan Chainsaw model P4018/TYPE 2


Husqvarna fuel filter. If the fuel filter is clogged, it will restrict the flow of fuel to the carburetor. As a result, the engine may not start.

Chainsaw fuel cap with retainer

Primer bulb (or purge bulb) assembly. The primer bulb draws fuel into the carburetor to make the engine easier to start. The short port on the primer bulb is the inlet. The longer port is the outlet back to the fuel tank.

Champion Spark Plug (RCJ7Y). The spark plug ignites the fuel and air mixture in the engine's cylinder to power the engine. If the spark plug is has fouled (if the tip of the spark plug is burnt or damaged), the engine may not start or may run rough.

Kit-bar adjustment screw

Husqvarna chainsaw air filter. If the air filter is clogged or dirty, the engine may not start or may run rough.

Chainsaw carburetor. If the carburetor is clogged, the engine won't get enough fuel. As a result, the engine may not start or may run rough. The carburetor can often be cleaned or rebuilt, but sometimes it may need to be replaced.

Gasket kit

Assy wire harness

Husqvarna bar mounting nut.

Ring piston 42cc

Ignition coil module

Handle-starter

Spark arrestor kit

Tube intake