Shop replacement repair parts for Carrier Furnace model 395CAV060110GCJA

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Furnace draft inducer motor with cooling fan. Be aware that the screw holes are not threaded—you will need to use self-tapping screws to install the motor.

Limit switch

Transformer, 120V-24V 40VA

Igniter replacement kit

Pressure switch

Gas valve kit. *Should be installed by a certified Carrier repairperson.

High limit thermostat, 250 degrees Fahrenheit

Manual reset switch, opens at 350 degrees F

Furnace control board. The control board regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.

3/4HP 115Volts 60Hz 11.1 amp 1075 RPM's 4 Speed Open Enclosure 48Y Frame Single Phase CCW 4" Shaft

The control board regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.

Blower housing asy

Harness wire

Wiring harness