Maytag Dryer MGDB750YW3 Parts

The Dryer Repair & Maintenance Kit 4392065 includes rollers, a belt, and an idler pulley. It is specifically designed for 29 wide dryers built in 1965 or later. This kit addresses common issues that cause Whirlpool, Kenmore, Maytag, and KitchenAid dryers to become noisy.

Dryer drum support roller. If the dryer is making a rumbling or knocking noise the rollers may be worn out causing the drum not to turn smoothly.

Dryer gas burner valve solenoid set. If the dryer does not heat or heats intermittently the coils could be defective. To test, watch the burner and if the igniter glows for a while and then shuts off without the gas igniting, it usually means one of these coils is bad.

Dryer door catch. If the dryer door does not latch closed then the door strike or this catch is likely damaged

Dryer front panel retainer clip. 1 clip per pack.

Dryer LP conversion kit; Natural gas to LP (liquid propane). This kit includes the orifice, leak limiter, and instruction sheet.

Thermal cutoff

Dryer vent testing kit is for 29" dryers with a top mounted lint screen. Use the plastic card to hang inside your dryer drum, then run the unit three times empty. If the card stays in place, the venting and dryer need to be cleaned out. Complete instructions are included.

Electric dryer power cord kit, 4 foot 30 Amp 3 wire w/closed eyelets & strain relief

Stacking kit for hybrid dryer

Dryer drum drive belt

Four way dryer exhaust kit for side and bottom venting

Dryer rack for shoes and delicate items. Keep your items from tumbling or becoming tangled by using a dryer rack. This part fits Whirlpool Duet Premium, Vantage, and Maytag Maxima dryers.

Electric dryer power cord kit, 6 foot 30 Amp 4 wire with closed eyelets and strain relief

Drying rack - designed for Whirlpool 27 inch dryers with lint screens located inside the front door opening